I have found that dhcpcd works with older hardware, I got livecd and tested on multiple machines, the machines that have older hardware works on machines with no new hardware. My test was simply load the livecd and make dhcpcd eth0
Tanks Alexandre Riveira 2011/8/12 Alexandre Riveira <alexan...@objectdata.com.br> > > Hello Michael, tanks for your help ! > I discov > > > > 2011/8/11 Mick <michaelkintz...@gmail.com> > >> Hi Alexandre and welcome to Gentoo! :) >> >> On Thursday 11 Aug 2011 21:32:58 Alexandre Riveira wrote: >> > I discovery values from routes: >> > >> > dhcpcd >> > >> > Kernel IP routing table >> > Destination Gateway Genmask Flags Metric Ref Use >> > Iface >> > 0.0.0.0 192.168.0.2 0.0.0.0 UG 0 0 0 >> > eth0 127.0.0.0 - 255.0.0.0 ! 0 - >> >> The "!" shows that the local route is not accepted on eth0 and indeed it >> should not be bound to the eth0 interface, but to lo. >> >> When you run ifconfig what does it show? When you run 'ip route show' >> what do >> you get? >> >> How have you configured your /etc/conf.d/net? >> >> > 0 - 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 >> > 0 eth0 >> > >> > >> > Static Ip >> > >> > Destination Gateway Genmask Flags Metric Ref Use >> > Iface >> > 0.0.0.0 192.168.0.2 0.0.0.0 UG 202 0 0 >> > eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 >> > 0 lo 192.168.0.0 0.0.0.0 255.255.255.0 U 202 0 >> > 0 eth0 >> >> The local and eth0 interfaces seem to be reversed. How have you defined >> how >> your local and eth0 interfaces are routed? >> >> -- >> Regards, >> Mick >> > >
