On 2012-03-22 17:53:51 +0100, Canek Peláez Valdés said:
On Thu, Mar 22, 2012 at 5:21 AM, Kraus Philipp
<philipp.kr...@flashpixx.de> wrote:
Hello,
I'm using a Hauppauge WinTV HVR 1900 (usb), with a self-compiled kernel
3.2.11. The USB device works very well, but I would like to use LIRC
0.9.0 with my kernel. So I have set the LIRC_DEVICES="hauppauge" within
my make.conf and run emerge.
Emerge fetches this packages:
[ebuild N ] sys-kernel/gentoo-sources-3.2.11 USE="-build -deblob
-symlink"
[ebuild N ] virtual/linux-sources-0
[ebuild N ] app-misc/lirc-0.9.0
On emerging this error is shown:
/var/tmp/portage/app-misc/lirc-0.9.0/work/lirc-0.9.0/drivers/lirc_i2c/lirc_i2c.c
/var/tmp/portage/app-misc/lirc-0.9.0/work/lirc-0.9.0/drivers/lirc_i2c/lirc_i2c.c:
In function 'ir_probe':
/var/tmp/portage/app-misc/lirc-0.9.0/work/lirc-0.9.0/drivers/lirc_i2c/lirc_i2c.c:559:13:
error: 'struct i2c_adapter' has no member named 'id'
/var/tmp/portage/app-misc/lirc-0.9.0/work/lirc-0.9.0/drivers/lirc_i2c/lirc_i2c.c:
At top level:
/var/tmp/portage/app-misc/lirc-0.9.0/work/lirc-0.9.0/drivers/lirc_i2c/lirc_i2c.c:232:12:
warning: 'add_to_buf_pvr2000' defined but not used
(How) Can I solve this problem?
I don't know if this will help you in any way. I have a media center
with a Thermaltake LCD, which besides the LCD (which is actually a
VFD) it includes an imon remote control. I used to have LIRC, and
everything was right.
After kernel 2.6.36 (or similar), LIRC stopped working (I use
vanilla-sources). So I upgraded to the 3.2 kernel, and selected
IR_IMON in Device Drivers -> Multimedia support -> Remote Controller
adapters.
Thanks for this information. In the 3.2.11 sources the Remote Controller option
is named CONFIG_RC_CORE and I have set the options
Compile Remote Controller keymap modules (CONFIG_RC_MAP)
Enable IR raw decoder for the NEC protocol (CONFIG_IR_NEC_DECODER)
Enable IR raw decoder for the RC-5 protocol (CONFIG_IR_RC5_DECODER)
Enable IR raw decoder for the RC6 protocol (CONFIG_IR_RC6_DECODER)
Enable IR raw decoder for the JVC protocol (CONFIG_IR_JVC_DECODER)
Enable IR raw decoder for the Sony protocol (CONFIG_IR_SONY_DECODER)
Enable IR raw decoder for the RC-5 (streamzap) protocol
(CONFIG_IR_RC5_SZ_DECODER)
Enable IR raw decoder for the MCE keyboard/mouse protocol
(CONFIG_IR_MCE_KBD_DECODER)
Enable IR to LIRC bridge (CONFIG_IR_LIRC_CODEC)
for building as modules.
Now the remote works perfectly, *BUT* I don't have LIRC installed
anymore. The remote works as a keyboard, and I didn't had to configure
anything in XBMC.
Can you run the emerge build command for lirc and take a look if the build
process crashs at the same source code line, like my sources?
Thanks a lot for your help
Phil
