Hi list. I think some of you have Radeon video cards, right? I'm having trouble getting my built-in video card to work:
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6530D] The problem is that the screen goes black during boot if KMS is enabled, but works just fine when disabled. I found an error in dmesg, but I don't know how to fix it: [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (SUMO 0x1002:0x964A 0x17AA:0x3625). [drm] register mmio base: 0xFEB00000 [drm] register mmio size: 262144 ATOM BIOS: General radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 1766482 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. radeon 0000:00:01.0: irq 42 for MSI/MSI-X radeon 0000:00:01.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading SUMO Microcode r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin" [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:00:01.0: disabling GPU acceleration BTW, I did compile in all three SUMO firmware files, and SUMO_pfp.bin is one of them. Should I see messages for the other two *if* they did load okay? I don't know if they did or not.
