I was afraid of that <G>. There is a bug with rmmod causing crashing in Bugzilla. What puzzles me is these two systems have never had any problem at all - I even did a make oldconfig with the 2.6.11 .config so they would be the same.
> > From: Volker Armin Hemmann <[EMAIL PROTECTED]> > Date: 2005/08/31 Wed PM 10:34:59 EDT > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Adaptec AIC7xxx kernel problems? > > On Thursday 01 September 2005 04:13, Brett I. Holcomb wrote: > > I'm wondering if it's just me or is anyone else having problems. I am > > running 2.6.11-r6 with no problems on a system with an Adaptec 39160 card. > > I tried to go to 2.6.12-r6 and r9 but kept getting kernel panics on boot. > > I have another system I'm installing Gentoo on that has an Adaptec 2940uw > > on and since I was using 2005.0 it had 2.6.12 on it and would not boot. I > > found that on both systems if I build the aic7xxx as a module I can get > > further in the boot process. I also tried 2005.1 but that is a disaster > > on both systems. I tell it to noload=aic7xxx and it loads it anyway which > > results in system not running. > > > > Is it just me <G>. > > it have to ;) > > I have an adaptec 2944 card and it works without problems (just did a big > restore through it with an 2.6.12-gentoo* kernel). At least none while > booting ;) > -- > gentoo-user@gentoo.org mailing list > > -- gentoo-user@gentoo.org mailing list