Mick <michaelkintz...@gmail.com> [14-11-16 15:20]: > On Sunday 16 Nov 2014 13:49:02 meino.cra...@gmx.de wrote: > > Hi, > > > > I connected a Arietta.G25 via Ethernet over USB (using a simple USB > > cable and hardware USB->Ethernet Adaptor to my Gentoo PC. I can ssh > > on that little tiny board. Now I want to access the internat from > > within the Arietta. Therefore all requests need to be transfered from > > the Arietta board to my PC, which then plays the role of an ISP to > > the Arietta board and itself places the requests to the internet > > instead of the Arietta board itself. > > > > But this is a too longish explanation to be put into a google request. > > > > Is there any name for that...so I am able to find the tutorials/howtos > > myself? > > > > Sorry...I am no native english speaker... > > > > Best regards, > > Meino > > > > PS: What USB->Ethernet adaptor could one recommend...the Arietta is > > USB-powered...? > > Sorry, I don't even know what Arietta may be. You need to be able to forward > packets from Arietta via your PC and 'masquerade' their address. If the > connection was via ethernet, then something like this would work: > > echo 1 > /proc/sys/net/ipv4/ip_forward > iptables -t nat -F > iptables -t nat -A POSTROUTING -j MASQUERADE > > However, I am not sure if something special is needed for a USB to PC > connection, it depends what the USB connection shows up as. I hope this gets > you on the right path. > > -- > Regards, > Mick
Hi Holger, Hi Mick, Thanks fpr the quick help and infos! It works! :) Arietta G25: http://www.acmesystems.it/arietta Best regards, Meino
