* meino.cra...@gmx.de <meino.cra...@gmx.de> [150728 14:08]: [..SNIP..] > Hi Todd, > > I unblocked with rfkill and I am a step further: > The SSID is shown on my tablet together with a > boobastic signal strength (no wonder: distance is below 30 cm...;) > BUT: No connect...: > > I start hostapd by hand since wpa_supplicant seems to be hardcoded > somewhere... > > Now I got this (stderr of hostapd) > > wlan0: interface state COUNTRY_UPDATE->ENABLED > wlan0: AP-ENABLED > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: authenticated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: associated (aid 1) > wlan0: AP-STA-CONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd RADIUS: starting accounting session > 55B7C32D-00000000 > wlan0: STA ac:9e:17:e7:c7:bd WPA: pairwise key handshake completed (RSN) > wlan0: AP-STA-DISCONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: disassociated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: deauthenticated due to inactivity > (timer DEAUTH/REMOVE) > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: authenticated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: associated (aid 1) > wlan0: AP-STA-CONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd RADIUS: starting accounting session > 55B7C32D-00000001 > wlan0: STA ac:9e:17:e7:c7:bd WPA: pairwise key handshake completed (RSN) > wlan0: AP-STA-DISCONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: disassociated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: deauthenticated due to inactivity > (timer DEAUTH/REMOVE) > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: authenticated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: associated (aid 1) > wlan0: AP-STA-CONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd RADIUS: starting accounting session > 55B7C32D-00000002 > wlan0: STA ac:9e:17:e7:c7:bd WPA: pairwise key handshake completed (RSN) > wlan0: AP-STA-DISCONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: disassociated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: deauthenticated due to inactivity > (timer DEAUTH/REMOVE) > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: authenticated > wlan0: STA ac:9e:17:e7:c7:bd IEEE 802.11: associated (aid 1) > wlan0: AP-STA-CONNECTED ac:9e:17:e7:c7:bd > wlan0: STA ac:9e:17:e7:c7:bd RADIUS: starting accounting session > 55B7C32D-00000003 > wlan0: STA ac:9e:17:e7:c7:bd WPA: pairwise key handshake completed (RSN) > > What's happening here...? > > I am sure, it is a layer 8 failure.... ;) > (me) > > Best regards, > Meino
Hi Meino, Again, I'm not sure, but it looks like hostapd is set up to do WPA with EAP (WPA-Enterprise) which uses a RADIUS backend. Is it possible that you want to make sure your hostapd configuration file is configured for WPA-PSK (something like:) auth_algs=1 # 1=wpa, 2=wep, 3=both wpa=2 # WPA2 only wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_passphrase=somepassword Sorry if you already posted that you have that already. I've lost track of what your hostapd configuration file has in it. Regards, Todd