I had this problem, or at least something similar.  My solution (and this isn't 
specific instructions) was to boot from the CentOS "Everything" disc, and from 
there I could get a grub prompt, which would allow me to boot the system, which 
then from there I installed grub.  I think I ended up going through a few 
itterations before I got it booting correctly from the SSD, but in the end I 
got there.

On 2017-08-14 20:32, symack wrote:
> Hello Everyone,
>
> New installation on an older x346 system that has a HW raid serveraid7k.
> I have the appropriate kernel driver compiled `aic79xx`.
>
> lscpi:
>
> 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
> 00:00.1 Unassigned class [ff00]: Intel Corporation E7525/E7520 Error
> Reporting Registers (rev 0c)
> 00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port
> A (rev 0c)
> 00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B
> (rev 0c)
> 00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 0c)
> 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c)
> 00:08.0 System peripheral: Intel Corporation E7525/E7520/E7320 Extended
> Configuration Registers (rev 0c)
> 00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #1 (rev 02)
> 00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #2 (rev 02)
> 00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
> EHCI Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> Interface Bridge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
> Controller (rev 02)
> 01:06.0 VGA compatible controller: Advanced Micro Devices, Inc.
> [AMD/ATI] RV100 [Radeon 7000 / Radeon VE]
> 02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
> A (rev 09)
> 02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
> B (rev 09)
> 03:03.0 Network controller: MYRICOM Inc. Myrinet 2000 Scalable Cluster
> Interconnect (rev 06)
> 05:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5721 Gigabit
> Ethernet PCI Express (rev 11)
> 06:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5721 Gigabit
> Ethernet PCI Express (rev 11)
> 07:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor
> (A-Segment Bridge) (rev 07)
> 07:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor
> (B-Segment Bridge) (rev 07)
> 08:0e.0 RAID bus controller: Adaptec ServeRAID Controller (rev 07)
>
>
>
> emerge --info
>
>
> Portage 2.3.6 (python 3.4.5-final-0, hardened/linux/amd64, gcc-5.4.0,
> glibc-2.23-r4, 4.8.17-hardened-r2 x86_64)
> =================================================================
> System uname:
> Linux-4.8.17-hardened-r2-x86_64-Intel-R-_Xeon-TM-_CPU_3.60GHz-with-gentoo-2.3
> KiB Mem:     8061620 total,   6539044 free
> KiB Swap:          0 total,         0 free
> Timestamp of repository gentoo: Mon, 07 Aug 2017 15:30:01 +0000
> sh bash 4.3_p48-r1
> ld GNU ld (Gentoo 2.28 p1.2) 2.28
> app-shells/bash:          4.3_p48-r1::gentoo
> dev-lang/perl:            5.24.1-r2::gentoo
> dev-lang/python:          2.7.12::gentoo, 3.4.5::gentoo
> dev-util/pkgconfig:       0.28-r2::gentoo
> sys-apps/baselayout:      2.3::gentoo
> sys-apps/openrc:          0.28::gentoo
> sys-apps/sandbox:         2.10-r3::gentoo
> sys-devel/autoconf:       2.69::gentoo
> sys-devel/automake:       1.15-r2::gentoo
> sys-devel/binutils:       2.28-r2::gentoo
> sys-devel/gcc:            5.4.0-r3::gentoo
> sys-devel/gcc-config:     1.7.3::gentoo
> sys-devel/libtool:        2.4.6-r3::gentoo
> sys-devel/make:           4.2.1::gentoo
> sys-kernel/linux-headers: 4.4::gentoo (virtual/os-headers)
> sys-libs/glibc:           2.23-r4::gentoo
> Repositories:
>
> gentoo
>     location: /usr/portage
>     sync-type: rsync
>     sync-uri: rsync://rsync.gentoo.org/gentoo-portage
> <http://rsync.gentoo.org/gentoo-portage>
>     priority: -1000
>
> ACCEPT_KEYWORDS="amd64"
> ACCEPT_LICENSE="* -@EULA"
> CBUILD="x86_64-pc-linux-gnu"
> CFLAGS="-march=core2 -msse4.1 -msse4.2 -mtune=generic -O2 -pipe"
> CHOST="x86_64-pc-linux-gnu"
> CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc
> /usr/share/gnupg/qualified.txt"
> CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf
> /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
> CXXFLAGS="-march=core2 -msse4.1 -msse4.2 -mtune=generic -O2 -pipe"
> DISTDIR="/usr/portage/distfiles"
> FCFLAGS="-O2 -pipe"
> FEATURES="assume-digests binpkg-logs config-protect-if-modified
> distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch
> preserve-libs protect-owned sandbox sfperms strict unknown-features-warn
> unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
> FFLAGS="-O2 -pipe"
> GENTOO_MIRRORS="http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/
> ftp://mirror.csclub.uwaterloo.ca/gentoo-distfiles/";
> LANG="en_US.utf8"
> LDFLAGS="-Wl,-O1 -Wl,--as-needed"
> MAKEOPTS="-j2"
> PKGDIR="/usr/portage/packages"
> PORTAGE_CONFIGROOT="/"
> PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
> --omit-dir-times --compress --force --whole-file --delete --stats
> --human-readable --timeout=180 --exclude=/distfiles --exclude=/local
> --exclude=/packages --exclude=/.git"
> PORTAGE_TMPDIR="/var/tmp"
> USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri gdbm
> hardened iconv ipv6 justify modules multilib ncurses nls nptl openmp pam
> pax_kernel pcre pie readline seccomp session ssl ssp tcpd unicode
> urandom xattr xtpax zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000
> atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938
> es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio
> via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core
> socache_shmcb unixd actions alias auth_basic authn_alias authn_anon
> authn_dbm authn_default authn_file authz_dbm authz_default
> authz_groupfile authz_host authz_owner authz_user autoindex cache cgi
> cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter
> file_cache filter headers include info log_config logio mem_cache mime
> mime_magic negotiation rewrite setenvif speling status unique_id userdir
> usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets
> stage tables krita karbon braindump author" COLLECTD_PLUGINS="df
> interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx sse
> sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore
> fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom
> oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2
> timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput keyboard
> mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780
> lb216 lcdm001 mtxorb ncurses text"
> LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"
> OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6"
> POSTGRES_TARGETS="postgres9_5" PYTHON_SINGLE_TARGET="python3_4"
> PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby21 ruby22"
> USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi
> vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2
> ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq
> steal rawnat logmark ipmark dhcpmac delude chaos account"
> Unset:  CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK,
> LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS,
> PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
>
>
>
> When I try to mount the partitions outside of chroot everything mounts
> fine. Within chroot, I get a "permission denied" when trying to mount. I
> am kind of stuck because when trying to install grub, I am getting:
>
> grub-install /dev/sda
> Installing for i386-pc platform.
> grub-install: warning: disk does not exist, so falling back to partition
> device /dev/sda4.
> grub-install: warning: disk does not exist, so falling back to partition
> device /dev/sda4.
> grub-install: warning: disk does not exist, so falling back to partition
> device /dev/sda4.
> grub-install: error: disk `hostdisk//dev/sda4' not found.
>
>
> Your help is greatly appreciated.
>
> Mike

-- 
Jigme Datse Yli-Rasku
jigme.da...@datsemultimedia.com (Preferred address for new messages)

Jigme Datse Yli-Rasku
PO Box 270
Rossland, BC V0G 1Y0
Canada

.......................................................................
... This message should be electronically signed, and if the sender ...
... has your public key, may also be encrypted. ...
... If you have any questions about this, please email, or call. ...
.......................................................................




Attachment: signature.asc
Description: OpenPGP digital signature

Reply via email to