On Sun, 2006-01-08 at 10:18 -0800, Mark Knecht wrote: > On 1/8/06, Michael Sullivan <[EMAIL PROTECTED]> wrote: > > On Sun, 2006-01-08 at 09:32 -0800, Mark Knecht wrote: > > > Michael Sullivan <[EMAIL PROTECTED]> wrote: > > > > > > > > > > I tried the test "cat /dev/video0 > test.mpg" and opening it in mplayer > > > > and all I got was the blank screen. > > > > > > I've been through this numerous times. It's no fun. Sorry. > > > > > > First, and most important, what does dmesg about ivtv show when you boot? > > > > > > > [EMAIL PROTECTED] ~ $ dmesg | grep 'ivtv' > > ivtv: ==================== START INIT IVTV ==================== > <SNIP> > > ivtv: ==================== END INIT IVTV ==================== > > [EMAIL PROTECTED] ~ $ > > That looked OK to me. > > > > > > > > Second, when you record 10 seconds of data to test.mpg what is the > > > file size? Zero/small means ivtv simply isn't working. Large means it > > > is but the tuner or something else is not working correctly. > > > > > camille ~ # cat /dev/video0 > temp.mpg > > > > camille ~ # ls -lh temp.mpg > > -rw-r--r-- 1 root root 13M Jan 8 11:46 temp.mpg > > So you are getting 'data', even if it was black. I see in a second > email you got a picture now. That's good. > > > > > Note that there are a number of us that are unable to reboot PVR > > > cards. We must cold boot them to have them operate correctly. Info > > > will show up in dmesg if you are one of this unfortunate select group. > > > lspci -x after a warm and cold boot would show a difference. > > > > <SNIP> > > > > 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 > > (CX23416) MPEG-2 Encoder (rev 01) > > 00: 44 44 16 00 16 01 10 02 01 00 00 04 10 40 00 00 > > 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 > > 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 01 48 > > 30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 80 08 > <SNIP> > > > > And here is lspci -x from a "warm" boot: > <SNIP> > > > > 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 > > (CX23416) MPEG-2 Encoder (rev 01) > > 00: 44 44 16 00 16 01 10 02 01 00 00 04 10 40 00 00 > > 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 > > 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 01 48 > > 30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 80 08 > <SNIP> > > You are lucky. You do not have the problem I have. > > OK, since your other email said you got a picture but Myth isn't > seeing it please try removing the current card setup in mythsetup and > recreating it. I've had a couple of times where an ivtv update caused > the existing card settings to not work. I delete them, recreate it > from scratch, and I'm back to the races. > > On other possibility is how you are linking the PVR to Myth. Did yuo > set the video device to /dev/v4l/video0 (not /dev/video0) and the > default input to Tuner 0? In the input connections section did you set > Tuner 0 to your cable listing from Zap2It? > > Hope this helps, > Mark >
I'm not going to mark my mythtv problem SOLVED until I'm sure that mythbackend is running stably. It seems to be working for now. The problem is that I can't change channels in mythfrontend. I'm watching live TV and I'm hitting the Up arrow key (as specified on mythtv's web site, but the channel is not changing. What's worse is that it seems all that's on the one channel I get is infomercials! How can I fix this??? I ran mythsetup and and went to the Channel Editor. There were no channels defined. I wanted the click the Scan For Channels button, but I couldn't figure out how to get to it. Also, (I think it was in mythfrontend) I set the GUI to appear in a window instead of full screen. It turned out to be not what I wanted and now I can't find the option to get the full screen mode back. Help! -- gentoo-user@gentoo.org mailing list
