Michael W. Holdeman wrote:
I have a wireless card in my laptop, setup on all my ap's it is assigned
192.168.14.102. My vm-ware is setup to use samba to share the drives on teh
laptop. Now I have the necessity to use ap's that are set-up to use
192.168.0.nn series ip addresses, so therefore samba does not work properly
to share those disk drives.
I want to use possible an alaised eth1:1? and set it at 192.168.14.102 somehow
to get samba to work correctly, and I am lost..
Any info would be appreciated.
Mike
This is a snip of /etc/conf.d/net from one of my servers.
config_eth0=(
"192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255"
"192.168.2.2 netmask 255.255.255.0 brd 192.168.2.255"
"192.168.3.2 netmask 255.255.255.0 brd 192.168.3.255"
)
Works for me, but i'm not sure about the /24 netmasks - aliasing
interfaces on my freebsd boxen i came upon the requirement to set
netmasks of aliases to 255.255.255.255.
Just checked out - I seem to have some trouble connecting between the
machines. Maybe someone can point me to some good information about
netmasks and aliases?
--
gentoo-user@gentoo.org mailing list