On Mon, Jun 05, 2006 at 04:01:10PM +1100, Dmitry Mashkovskiy wrote: > Hello, > > I've successfully set up Gentoo on the machine with ABIT IS7 motherboard > and two SATA disks (integrated controller on ICH5 chipset, I guess). The > first one is Seagate (Ch2 M. (master?) in BIOS) with WinXP, the second > is Maxtor (Ch3 M. in BIOS) with Gentoo and GRUB in MBR. One problem is > that I cannot boot in Windows while booting with GRUB. Here is my grub.conf: > ------------- > default 0 > timeout 10 > > title=Windows XP > rootnoverify (hd1,0) > makeactive > chainloader +1 > > title=Gentoo Linux 2.6.12-r6 > root (hd0,0) > kernel /kernel-2.6.12-gentoo-r6 root=/dev/sdb3 irqpoll > ------------- > I get only > > Booting 'Windows XP' > rootnoverify (hd1,0) > makeactive > chainloader +1 > > and then machine hangs. So I have to set Seagate drive as a boot device > in BIOS in order to boot Windows. How can I work it out? Should I > install GRUB in the MBR of Windows disk? > Another problem is that sometimes machine freezes or falls in kernel > panic while booting Gentoo (usually on probing ATA devices). I suppose > it may be due to buggy/broken hardware but it would be nice to find some > solution or workaround. > > > Thanks in advance, > D. > -- > gentoo-user@gentoo.org mailing list
I hope the following works for you: default 0 timeout 10 title=Windows XP rootnoverify (hd0,0) chainloader +1 title=Gentoo Linux 2.6.12-r6 root (hd1,0) kernel /kernel-2.6.12-gentoo-r6 root=/dev/sdb3 irqpoll -- Shaochun Wang(王绍春) <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
