On Mon, Jul 10, 2006 at 10:26:04PM +0930, Raymond Lewis Rebbeck wrote: > On Monday, 10 July 2006 22:12, Andreas Burghardt wrote: > > On Mon, Jul 10, 2006 at 02:10:10PM +0200, Stef?n Istv?n wrote: > > > h?tf? 10 j?lius 2006 13.40 d?tummal Andreas Burghardt ezt ?rta: > > > > On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote: > > > > > On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > > > > > > *udma2 > > > > > > > > I'm very sorry, but you all see that I'm quite new to Linux ... > > > > If UDMA2 is activated for the drive why is the data trasfer slow and > > > > > > > > tapa ~ # hdparm -d1 /dev/hdc > > > > > > > > /dev/hdc: > > > > setting using_dma to 1 (on) > > > > HDIO_SET_DMA failed: Operation not permitted > > > > using_dma = 0 (off) > > > > > > > > Why cant I activate DMA? > > > > > > What kind of chipset does your motherboard use? > > > You can check it with the lspci command. Maybe you have to load a kernel > > > module for that chipset... > > > > 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express > > Processor to DRAM Controller (rev 03) > > 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express > > Root Port (rev 03) > > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #1 (rev 04) > > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #2 (rev 04) > > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB2 EHCI Controller (rev 04) > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) > > 00:1e.2 Multimedia audio controller: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) > > 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 > > Modem Controller (rev 04) > > 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge > > (rev 04) > > 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller > > (rev 04) > > 01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon > > Mobility M300] > > 06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network > > Connection (rev 05) > > 06:06.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller > > 06:06.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader > > Controller > > 06:06.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader > > Controller > > 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > 06:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 > > Controller (PHY/Link) > > Looks like the same chipset as my laptop. In order to get DMA working I had > to > set CONFIG_IDE=n and enable SCSI cdrom support and CONFIG_SCSI_ATA_PIIX. > > Your cdrom device will become /dev/sr0 and you shouldn't have any issues with > DMA. >
Thank you very much, its working! And thx to all who helped me! > > > > > Istvan > > > > > > -- > > > gentoo-user@gentoo.org mailing list > > > > -- > > > > "Dan ketika Guru Isa mendengar derap sepatu datang > > ke pintu kamar mereka, dia merasa damai dengan rasa > > takutnya yang timbul. Dia tahu teror mereka tidak > > akan bisa menyentuhnya lagi. Dia telah bebas." > > (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) > > -- > Raymond Lewis Rebbeck > -- > gentoo-user@gentoo.org mailing list > -- "Dan ketika Guru Isa mendengar derap sepatu datang ke pintu kamar mereka, dia merasa damai dengan rasa takutnya yang timbul. Dia tahu teror mereka tidak akan bisa menyentuhnya lagi. Dia telah bebas." (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) -- gentoo-user@gentoo.org mailing list
