On Mon, 24 Jul 2006 11:31:01 +0100 Uwe Thiem <[EMAIL PROTECTED]> wrote:
> On 24 July 2006 00:52, Nick Rout wrote: > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.4.4 (tagged release) loading > > ivtv: Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) > > ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) > > -> IRQ 10 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > > cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > > **********cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes) > > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > > tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > > tveeprom 0-0050: The eeprom says no radio is present, but the tuner type > > tveeprom 0-0050: indicates otherwise. I will assume that radio is present. > > tveeprom 0-0050: Hauppauge model 26559, rev C260, serial# 2945285 > > tveeprom 0-0050: tuner model is LG S001D MK3 (idx 60, type 38) > > tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom > > 0x74) tveeprom 0-0050: audio processor is CX25843 (idx 37) > > tveeprom 0-0050: decoder processor is CX25843 (idx 30) > > tveeprom 0-0050: has radio, has no IR remote > > *************ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > > total) ivtv0: Create encoder radio stream > > tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > > ivtv0: Initialized WinTV PVR 150, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > Mine looks pretty much the same except that it detects the remote. Firmware > gets loaded, all drivers get loaded, no errors. > > Meanwhile I do have audio but very very faint if i raise everything to > maximum > (mixer, speaker amplifier, ivtvctl). > > I don't know. Maybe the hardware is fried. > > Uwe The guy on the mythtv list thought his was OK too until someone else spotted the error - I'm not saying you cannot read a log file, but y'know it happens to the best of us :-( As far as i recall you have been trying so far with composite/line in. Is it worth trying the tuner? What sort of input does your line-in have? Mine is two RCA plugs, but I have heard of them having the 2.5mm stereo plugs too (like a headphone socket on a walkman). If so, make sure the plug is the right one. Not sure where else to go from here, except back to the vendor. > > -- > Mark Twain: I rather decline two drinks than a German adjective. I love that quote! -- gentoo-user@gentoo.org mailing list
