Mick <michaelkintzios <at> gmail.com> writes:
> I've booted into a new kernel (2.6.18-gentoo-r2) and suddenly discovered more
> info than I had previously noticed in lspci regarding my video card:
> ==================================================
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
> (prog-if 00 [VGA])
> Subsystem: Compaq Computer Corporation Evo N600c
> Flags: bus master, stepping, 66MHz, medium devsel, latency 66, IRQ 11
> Memory at 48000000 (32-bit, prefetchable) [size=128M]
> I/O ports at 3000 [size=256]
> Memory at 40200000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at 40220000 [disabled] [size=128K]
> Capabilities: [58] AGP version 2.0
> Capabilities: [50] Power Management version 2
> ==================================================
Hello Mick,
I have an ATI video card that says the same thing about the ROM:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 [Mobility
FireGL 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer Unknown device 0402
Flags: bus master, stepping, fast Back2Back, 66MHz, medium devsel,
latency 66, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at ec100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at ec120000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
This is under a 2.6.17-gentoo-r8 kernel....
I'm going to look at what you are saying under two different
kernels (2.6.17-gentoo-r8 and 2.6.18-gentoo-r8) to see
what I get. I'd be curious as to how your problem is
resolved too, as it may help me get more 3D performance too.
James
--
gentoo-user@gentoo.org mailing list
