-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Salutations --
I'm puzzled. I know that this card supports WOL, because I've done it:
# uname -r
2.6.18-gentoo-r3
# lspci |grep 3c
01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 78)
However:
# ethtool -s eth0 wol g
Cannot get current wake-on-lan settings: Operation not supported
not setting wol
and further:
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 24
Transceiver: internal
Auto-negotiation: on
Current message level: 0x00000001 (1)
Link detected: yes
This is goofy, because it definitely used to report that at least WOL g
was supported, though it was a couple of kernels ago. I have tried
adding 'options 3c59x enable_wol=1' to modules.d/3c59x, though this was
not previously necessary, and still nothing.
Has something changed with this driver?
Cheers -d
- --
David Talkington
PGP key: http://www.prairienet.org/~dtalk/004B8F8B.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFb8wI5FKhdwBLj4sRAiQhAJ9kHqypdKxgm7dDks/ltxChBhJTPQCggphB
wy98LvAZF6ZFDNI2PofY7Yg=
=Sltz
-----END PGP SIGNATURE-----
--
gentoo-user@gentoo.org mailing list