did you configure manually your ip for testing before starting net.eth0 ??? in this case, try
ifconfig eth0 down and /etc/init.d/net.eth0 if work fine, just add it to default profile rc-update add net.eth0 default just an explanation: ifconfig do up on network card, so net.eth0 try up too and fail cause already up they don't try down before up ... so if you configure manually by typing command ifconfig eth0 MYIP netmask MYNETMASK brd MYBRD route add default gw MYGW so .. eth0 is up and net.eth0 couldn't do up again so ifconfig eth0 down shutdown the network card, and so all work fine after :) have fun 2006/12/30, Chuanwen Wu <[EMAIL PROTECTED]>:
2006/12/30, Dan <[EMAIL PROTECTED]>: > On Fri, 29 Dec 2006 09:27:46 +0800 > "Chuanwen Wu" <[EMAIL PROTECTED]> wrote: > > > 2006/12/28, Oliver Schmidt <[EMAIL PROTECTED]>: > > > Hello Chuanwen > > > But everytime I do > > #/etc/init.d/net.eth0 start or > > #/etc/init.d/sshd start > > the error is still all the same : MYIP already taken on eth0. > > How can I fix the problem,now? > > assuming you were just doing that or have by now, mind > sending /etc/conf.d/net ? I have sent my /etc/conf.d/net in my first email.Just as below: # cat /etc/conf.d/net config_eth0=( "202.114.26.194 netmask 255.255.255.0 brd 202.114.26.255" ) routes_eth0=( "default gw 202.114.26.193" ) After #ifconfig eth0 MYIP #route add default gw MYGW I can connect the internet now,just like ping www.google.com. But as I said ,every time I do #/etc/init.d/net.eth0 start the error appear: MYIP already taken on eth0. And I also can't start sshd and ftp because they need to start net.eth0... > -- > gentoo-user@gentoo.org mailing list > > -- wcw -- gentoo-user@gentoo.org mailing list
