I am still in limbo about this drive.  I have gotten a disk scanning utility
from Gateway, and am now trying to get together a floppy to test it that
way.

I have had another HDD issue this week, on a SATA drive.  I may post
separately about that.  I can see partitions from Ubuntu that I cannot see
from Gentoo.  Etc.  Back to the laptop.  I hope for the best, and suspect
that somehow the disk was corrupted by software, and if so I HOPE it can be
recovered.  Otherwise, I guess I can run a live cd and save files to a usb
flash drive!  I haven't heard any strange noises, but the freezer trick
would certainly be a last resort.

Alan

On 1/3/07, Nelson, David (ED, PAR&D) <[EMAIL PROTECTED]> wrote:

I am maybe "late to the party" here but for specific types of disk failure
the freezer trick can work briefly if you have any data to recover (looks
unlikely in this case but thought I'd mention it). I did this for my friends
laptop drive a few weeks ago so he could back his stuff up to my box via
Samba - the drive was shoved in a plastic sealed bag with as much air
squeezed out as possible and left in a freezer for a few days. It lived for
an hour and a half before dying again.

(Note: the failure in this case involved the drive making a rather horrid
grinding noise)

In a rather cruel case of Murphy's law, one of my hard disks died the
following week, taking his backup with it. Nice.

David

Note: These views are my own, advice is provided with no guarantee of
success. I do not represent anyone else in any emails I send to this list.



> -----Original Message-----
> From: Mick [mailto:[EMAIL PROTECTED]
> Sent: 24 December 2006 13:09
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] desperation question: disklabel, unable to
> write to disk, etc.
>
>
> On Sunday 24 December 2006 08:42, PaulNM wrote:
> > Hi,
> >
> > These type of messages:
> >
> > [17180157.020000] hda: dma_intr: status=0x51 { DriveReady
> SeekComplete
> > Error }
> > [17180157.020000] hda: dma_intr: error=0x40 { UncorrectableError },
> > LBAsect=5, high=0, low=5, sector=0
> > [17180157.020000] ide: failed opcode was: unknown
> > [17180157.020000] end_request: I/O error, dev hda, sector 0
> >
> >
> > are very bad signs.  Nine times out of ten it means the
> drive is dead,
> > or nearly so.  The few times it's not a dead/dying drive,
> is usually due
> > to dma not being supported, or a bad cable. Given that dd is not
> > working, and nothing seems able to actually write to the drive, I'm
> > leaning towards a dead drive.
> >
> >     As a last ditch attempt, you could try reseating the
> power and ide
> > cable on the drive, as well as the motherboard end of the
> ide cable. If
> > you have another system laying around, you could put the
> problem drive
> > in there to confirm it is a drive problem.
>
> I agree that in all likelihood your HD is toast.  However,
> before you start
> searching on Ebay you would better follow the above advice to
> reseat cables
> and, or sockets.  I used to have an IBM laptop with a
> problematic floppy
> drive that needed reseating in its socket every now and then
> to cure its boot
> problems.
>
> --
> Regards,
> Mick
>

--
gentoo-user@gentoo.org mailing list




--
Alan Davis, Kagman High School, Saipan  [EMAIL PROTECTED]     1-670-256-2043

I consider that the golden rule requires that if I like a program I must
share it with other people who like it.              --------Richard
Stallman

Every great advance in natural knowledge has involved the absolute rejection
of authority.  ----- Thomas H. Huxley

Reply via email to