On Wednesday 09 May 2007, maxim wexler wrote: > --- Alan McKinnon <[EMAIL PROTECTED]> wrote: > > On Wednesday 09 May 2007, maxim wexler wrote: > > > Hi group, > > > > > > After upgrading from 2.6.16 to 2.6.20 kernel I no > > > longer can access CD or DVD. > > > > LOTS of kernel config changes related to > > ATA/SATA/PATA/IDE/libata > > changed in 2.6.18 and 2.6.19 - menus moved around, > > the code was > > refactored, selection names changed, etc, etc. > > > > If you are not absolutely sure your config is > > correct, please post > > your .config, lspci and details about what hardware > > you really have > > done
You didn't say what bus type of cd & dvd you have, so I'm going to assume that they are IDE (or PATA in the new lingo). Speak up if they are actually SATA devices [snip] > # > # Processor type and features > # [snip] > CONFIG_M586=y Nothing to do with your disks, but why this setting? You seem to have a 64bit Opteron, not a MkI pentium > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMII is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUMM is not set > # CONFIG_MCORE2 is not set > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MK8 is not set maybe this one is more suitable for your hardware [snip] > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on > IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=m is this module loaded? > # CONFIG_BLK_DEV_CMD640 is not set > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > CONFIG_BLK_DEV_AMD74XX=m is this module loaded? > # CONFIG_BLK_DEV_ATIIXP is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_CS5535 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_JMICRON is not set > # CONFIG_BLK_DEV_SC1200 is not set > # CONFIG_BLK_DEV_PIIX is not set > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > CONFIG_BLK_DEV_SIIMAGE=m > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set [snip] > # > # Serial ATA (prod) and Parallel ATA (experimental) > drivers > # > CONFIG_ATA=y > # CONFIG_ATA_NONSTANDARD is not set > # CONFIG_SATA_AHCI is not set > # CONFIG_SATA_SVW is not set > # CONFIG_ATA_PIIX is not set > CONFIG_SATA_NV=y > # CONFIG_PDC_ADMA is not set > # CONFIG_SATA_QSTOR is not set > # CONFIG_SATA_PROMISE is not set > CONFIG_SATA_SIL=y > # CONFIG_SATA_SIL24 is not set > # CONFIG_SATA_SIS is not set > # CONFIG_SATA_ULI is not set > # CONFIG_SATA_VIA is not set > # CONFIG_SATA_VITESSE is not set > # CONFIG_PATA_AMD is not set You could try this one as a module and see if it works [snip] > As in the original post have /dev/hdc lite-on cdrom > reader/writer and /dev/hdd have creative labs dvd reader. At first glance your .config looks ok, so make sure those modules are in fact loading. And we should check that the devices haven't changed names meanwhile... The major/minor numbers will be the same, so run ls -al and grep for these strings: "3, 0" "22, 0" "33, 0" and anything else you might find relevant in <kernel-sources>/Documentation/devices.txt alan -- Optimists say the glass is half full, Pessimists say the glass is half empty, Developers say wtf is the glass twice as big as it needs to be? Alan McKinnon alan at linuxholdings dot co dot za +27 82, double three seven, one nine three five -- [EMAIL PROTECTED] mailing list
