On Tue, 5 Jun 2007 17:05:56 +0400 sa8o1age <[EMAIL PROTECTED]> wrote:
> i'm trying to install gentoo on Adaptec AAC-RAID (rev 01) Subsystem: > Hewlett-Packard Company AAR-2610SA. i've made RAID5 array with the 4 > sata disks. And i have also 1 IDE disk with the old gentoo. My aim is > to get rid of this IDE disk and to install gentoo on whole RAID5 > array. > > so this is it. > Old IDE: > > /dev/hda5 291M 79M 212M 28% / > /dev/hda6 6.6G 1.7G 4.9G 26% /usr > /dev/hda7 30G 195M 30G 1% /var > /dev/hda1 71M 38M 34M 53% /boot > > and here is the sata array: > > /dev/sda1 /boot ext2 > noauto,noatime 1 2 /dev/sda3 / > reiserfs noatime 0 1 /dev/sda2 > none swap sw 0 > 0 /dev/sda4 /store reiserfs > auto 0 0 > > so, i've just copied all files from IDE to sda-raid array, compiled > new kernel with the genkernel-tool and installed it on sda. > > kernel configuration: http://paste.org.ru/?wa5zzf > dmesg(of the same kernel on IDE): http://paste.org.ru/?9loypk > > my grub.conf: > > default 0 > timeout 10 > splashimage=(hd0,0)/grub/splash.xpm.gz > > title=Gentoo Linux > root (hd0,0) > kernel /boot/kernel-genkernel-x86-2.6.19-gentoo-r5 root=/dev/ram0 > init=/linuxrc ramdisk=8192 real_root=/dev/sda3 udev > initrd /boot/initramfs-genkernel-x86-2.6.19-gentoo-r5 > > after installation and copying i've removed IDE disk and tried to boot > from sda array. grub was loaded succesfully but the kernel was stuck > with this error: > > >> Activating mdev... > ... > mknod: /newroot/dev/console : read-only file system > mknod: /newroot/dev/tty1 : read-only file system > >> Booting (initramfs)..switch_root: Bad console '/dev/console' > Kernel panic - not syncing : Attempted to kill init > > > what am i doing wrong? The problem appears to be with /dev. When you copied, did you preserve all the permissions of everything and everything? -- [EMAIL PROTECTED] mailing list
