2007/7/4, Dominik Żyła <[EMAIL PROTECTED]>:



2007/7/4, Arturo 'Buanzo' Busleiman <[EMAIL PROTECTED]>:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA512
>
> Dominik Żyła wrote:
> > Hi,
> > I have 4 port D-Link DFE-580TX NIC and running Gentoo with 2.6.21
> > kernel. When I load sundance.ko there is no interfaces available in my
>
> > `ifconfig -a` output. Besides, all 4 interfaces are listed in `lspci`
> > output. Have anyone had such a problem?
>
> Send the output of "dmesg" right after modprobind sundance.
>
> - --
> Arturo "Buanzo" Busleiman - Consultor Independiente en Seguridad
> Informatica
> ¿Su empresa consume demasiado ancho de banda? ¡Consulteme!
> Free (as in Freedom) Punk Rock from Argentina:
> http://www.futurabanda.com.ar
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFGi53MAlpOsGhXcE0RCmUQAJ0UkXAg6PhxOBQnBnPq4YedhXQnEwCfabsi
> NEAXafefBEMbPkJIeOSDvOY=
> =Tq9i
> -----END PGP SIGNATURE-----
> --
> [EMAIL PROTECTED] mailing list


I`ve got only this output:
 sundance.c:v1.2 11-Sep-2006  Written by Donald Becker
  http://www.scyld.com/network/sundance.html
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 16 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 21

This is my lspci output:
02:04.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet
(rev 15)
02:05.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet
(rev 15)
02:06.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet
(rev 15)
02:07.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet
(rev 15)



So, any ideas?

Reply via email to