On Mon, 15 Oct 2007 13:48:23 +0000 "Eduardo Otubo" <[EMAIL PROTECTED]> wrote:
> Hi everyone, > > I am running a kernel-2.6.23 and wifi bcm43xx on my Compaq Presário > v2000. And my Wifi doesn't work. My module is compiled built-in, and > when I start my interface: > > $ ifconfig eth1 up > > I have this on my dmesg: > > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: > drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1489:bcm43xx_find_lopair() > bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: > drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1489:bcm43xx_find_lopair() > bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: > drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1489:bcm43xx_find_lopair() > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: > drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1489:bcm43xx_find_lopair() > > I can connect on SOME networks, encrypted or not. I mean, I do > connect, but I dont recieve any DHCP packs. When I connect (with DHCP, > or not) I keep connected for a little time, then the link just falls. > > Any idea? > Hmm. So the radio attenuation is too high? here: http://lists.berlios.de/pipermail/bcm43xx-dev/2006-October/003000.html they recommend switching your network to a different channel. -- [EMAIL PROTECTED] mailing list
