On Friday 2 May 2008, 10:50, Vladimir Rusinov wrote: > On Fri, May 2, 2008 at 12:22 PM, Vladimir Rusinov > > <[EMAIL PROTECTED]> wrote: > > Sorry, kernel module was not loaded and mppe was not enabled in > > options.pptp. Thank you. > > Another problem: the tunnel is now up, but I'm not able to ping or > telnet router
You have several network connections. You probably need to add some static route(s). What's the IP address of the router? > ppp0 Link encap:Point-to-Point Protocol > inet addr:192.168.5.253 P-t-P:192.168.5.1 > Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1448 > Metric:1 RX packets:9 errors:0 dropped:0 overruns:0 frame:0 > TX packets:149 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:3 > RX bytes:90 (90.0 b) TX bytes:11064 (10.8 Kb) > > # route > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref > Use Iface > 192.168.5.1 * 255.255.255.255 UH 0 0 0 > ppp0 > 172.16.85.0 * 255.255.255.0 U 0 0 0 > vmnet1 > 192.168.194.0 * 255.255.255.0 U 0 0 0 > vmnet8 > 192.168.1.0 * 255.255.255.0 U 0 0 0 > eth0 > loopback * 255.0.0.0 U 0 0 0 > lo > default 192.168.1.1 0.0.0.0 UG 0 0 0 > eth0 -- gentoo-user@lists.gentoo.org mailing list