On Thu, 2 Oct 2008 09:16:27 -0700 Grant <[EMAIL PROTECTED]> wrote: > >> I have this: > >> > >> # lspci > >> 05:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX > >> [Cyclone] (rev 34) > >> 05:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX > >> [Cyclone] (rev 30) > >> > >> but from ifconfig I only have eth0. Can anyone tell me how to > >> investigate this? > > > > Is that ifconfig, or ifcongif -a ? > > > > Or in a less pedantic answer, have you started eth1? > > I didn't think that through, sorry. I think this is what I should > have posted: > > # /etc/init.d/net.eth1 start > * Starting eth1 > * Bringing up eth1 > * 192.168.1.1 > * network interface eth1 does not exist > * Please verify hardware or kernel module (driver) [ !! ]
No problem, I just gave the first answer that came to mind when I saw your post ;) ifconfig -a will tell you if there are any cards detected which haven't come up. Worth checking to see if the card has been allocated a different number. Rob.
signature.asc
Description: PGP signature
