Hello,
i've just installed gentoo with kernel 2.6.27-r8 on a fujitsu-siemens
Amilo 1655G laptop and it works perfectly.
But sometimes happens that the keyboard wont be recognised by the kernel
after boot.
So i looked at dmesg output.
Normally the following lines appear, but in non working case they don't:
input: AT Translated Set 2 keyboard as /class/input/input3
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
Maybe somebody had the same problem and can tell me whats wrong.
I've added dmesg output for both cases.
Linux version 2.6.27-gentoo-r8 (r...@gleppi) (gcc version 4.1.2 (Gentoo 4.1.2
p1.0.2)) #2 Wed Mar 4 13:00:46 CET 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
BIOS-e820: 0000000037ea0000 - 0000000037eb2000 (ACPI data)
BIOS-e820: 0000000037eb2000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x37ea0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 37ea0000 @ 7000-d000
ACPI: RSDP 000F7B40, 0014 (r0 PTLTD )
ACPI: RSDT 37EAC4DB, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 37EB1DFF, 0074 (r1 ATI Piranha 6040000 ATI F4240)
ACPI: DSDT 37EAC50F, 58F0 (r1 FIC KR2W 6040000 MSFT 100000E)
ACPI: FACS 37EB2FC0, 0040
ACPI: SSDT 37EB1E73, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 37EB1F6A, 005A (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 37EB1FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: DMI detected: Fujitsu Siemens
0MB HIGHMEM available.
894MB LOWMEM available.
mapped low ram: 0 - 37ea0000
low ram: 00000000 - 37ea0000
bootmap 00009000 - 0000ffd4
(6 early reservations) ==> bootmem [0000000000 - 0037ea0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 00004e6800] TEXT DATA BSS ==> [0000100000 - 00004e6800]
#2 [00004e7000 - 00004ea000] INIT_PG_TABLE ==> [00004e7000 - 00004ea000]
#3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00037ea0
HighMem 0x00037ea0 -> 0x00037ea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037ea0
On node 0 totalpages: 228927
free_area_init_node: node 0, pgdat c046b4a0, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223170 pages, LIFO batch:31
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227137
Kernel command line: root=/dev/hda7 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Using PIT calibration value
Detected 1989.795 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903476k/916096k available (2497k kernel code, 12004k reserved, 1036k
data, 220k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffec000 - 0xfffff000 ( 76 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ea0000 ( 894 MB)
.init : 0xc0476000 - 0xc04ad000 ( 220 kB)
.data : 0xc0370725 - 0xc0473954 (1036 kB)
.text : 0xc0100000 - 0xc0370725 (2497 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency..
3979.59 BogoMIPS (lpj=1989795)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0c98)
net_namespace: 588 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:13.0 reg 10 32bit mmio: [c0005000, c0005fff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [c0006000, c0006fff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [c0007000, c0007fff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [84a0, 84af]
PCI: 0000:00:14.0 reg 14 32bit mmio: [c0004800, c0004bff]
PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:14.1 reg 18 io port: [170, 177]
PCI: 0000:00:14.1 reg 1c io port: [374, 377]
PCI: 0000:00:14.1 reg 20 io port: [84b0, 84bf]
PCI: 0000:00:14.2 reg 10 64bit mmio: [c0000000, c0003fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff]
PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff]
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: 0000:08:0a.0 reg 10 32bit mmio: [c0200000, c0201fff]
PCI: 0000:08:0b.0 reg 10 32bit mmio: [c0202000, c02027ff]
PCI: 0000:08:0b.0 reg 14 io port: [a400, a47f]
pci 0000:08:0b.0: supports D2
pci 0000:08:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:08:0b.0: PME# disabled
PCI: 0000:08:0d.0 reg 10 io port: [a000, a0ff]
PCI: 0000:08:0d.0 reg 14 32bit mmio: [c0202800, c02028ff]
pci 0000:08:0d.0: supports D1
pci 0000:08:0d.0: supports D2
pci 0000:08:0d.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:0d.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [a000, afff]
PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x68-0x68) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x6a-0x6a) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x6c-0x6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x6e-0x6e) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8
(0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff),
disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff),
disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dca service started, version 1.4
PCI: Using ACPI for IRQ routing
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
NET: Registered protocol family 8
NET: Registered protocol family 20
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: iomem range 0xd0004c00-0xd0004cff has been reserved
system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
b43-pci-bridge 0000:08:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) ->
IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:08:0a.0
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [9000, 9fff]
bus: 01 index 1 mmio: [c0100000, c01fffff]
bus: 01 index 2 mmio: [c8000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, fff]
bus: 02 index 1 mmio: [0, fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 08 index 0 io port: [a000, afff]
bus: 08 index 1 mmio: [c0200000, c02fffff]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:01:05.0: Boot video device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
radeonfb 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: SEC
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:05.0): ATI Radeon 5975 "Yu"
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FN1] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (65 C)
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
fujitsu-laptop: driver 0.4.2 successfully loaded.
8139too Fast Ethernet driver 0.9.28
8139too 0000:08:0d.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xf8816800, 00:40:ca:d9:00:45, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x84b0-0x84b7
ide1: BM-DMA at 0x84b8-0x84bf
Probing IDE interface ide0...
hda: ST9808210A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all
legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
aoe: AoE v47 initialised.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 10, io mem 0xc0007000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
ALSA device list:
No soundcards found.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-37 processors (1
cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16
input: AT Translated Set 2 keyboard as /class/input/input3
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
Clocksource tsc unstable (delta = 62992454 ns)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ]
EXT3 FS on hda7, internal journal
Adding 1502036k swap on /dev/hda6. Priority:-1 extents:1 across:1502036k
input: b43-phy0 as /class/input/input6
firmware: requesting b43/ucode5.fw
firmware: requesting b43/pcm5.fw
firmware: requesting b43/b0g0initvals5.fw
firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
b43-phy0 warning: You are using an old firmware image. Support for old firmware
will be removed in July 2008.
b43-phy0 warning: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the
latest firmware (version 4).
spurious 8259A interrupt: IRQ7.
b43-phy0: Radio hardware status changed to DISABLED
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 3035, comm: iwconfig Not tainted 2.6.27-gentoo-r8 #2
[<c0134fd7>] __report_bad_irq+0x24/0x69
[<c0134fde>] __report_bad_irq+0x2b/0x69
[<c01351c8>] note_interrupt+0x1ac/0x1e0
[<c013489f>] handle_IRQ_event+0x1a/0x3f
[<c013585a>] handle_level_irq+0x63/0x85
[<c0104d67>] do_IRQ+0x48/0x5d
[<c0103863>] common_interrupt+0x23/0x30
[<c013d028>] put_page+0x87/0x8a
[<c0140dbc>] __do_fault+0x293/0x29f
[<c0135878>] handle_level_irq+0x81/0x85
[<c0141ce1>] handle_mm_fault+0x206/0x42c
[<c010ff25>] do_page_fault+0x22c/0x573
[<c0104d6c>] do_IRQ+0x4d/0x5d
[<c010fcf9>] do_page_fault+0x0/0x573
[<c036f9ca>] error_code+0x6a/0x70
=======================
handlers:
[<c029ce6e>] (usb_hcd_irq+0x0/0x52)
Disabling IRQ #10
b43-phy0: Radio turned off by software
eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
Linux version 2.6.27-gentoo-r8 (r...@gleppi) (gcc version 4.1.2 (Gentoo 4.1.2
p1.0.2)) #2 Wed Mar 4 13:00:46 CET 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
BIOS-e820: 0000000037ea0000 - 0000000037eb2000 (ACPI data)
BIOS-e820: 0000000037eb2000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x37ea0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 37ea0000 @ 7000-d000
ACPI: RSDP 000F7B40, 0014 (r0 PTLTD )
ACPI: RSDT 37EAC4DB, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 37EB1DFF, 0074 (r1 ATI Piranha 6040000 ATI F4240)
ACPI: DSDT 37EAC50F, 58F0 (r1 FIC KR2W 6040000 MSFT 100000E)
ACPI: FACS 37EB2FC0, 0040
ACPI: SSDT 37EB1E73, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 37EB1F6A, 005A (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 37EB1FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: DMI detected: Fujitsu Siemens
0MB HIGHMEM available.
894MB LOWMEM available.
mapped low ram: 0 - 37ea0000
low ram: 00000000 - 37ea0000
bootmap 00009000 - 0000ffd4
(6 early reservations) ==> bootmem [0000000000 - 0037ea0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 00004e6800] TEXT DATA BSS ==> [0000100000 - 00004e6800]
#2 [00004e7000 - 00004ea000] INIT_PG_TABLE ==> [00004e7000 - 00004ea000]
#3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00037ea0
HighMem 0x00037ea0 -> 0x00037ea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037ea0
On node 0 totalpages: 228927
free_area_init_node: node 0, pgdat c046b4a0, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223170 pages, LIFO batch:31
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227137
Kernel command line: root=/dev/hda7
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Using PIT calibration value
Detected 1989.779 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903476k/916096k available (2497k kernel code, 12004k reserved, 1036k
data, 220k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffec000 - 0xfffff000 ( 76 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ea0000 ( 894 MB)
.init : 0xc0476000 - 0xc04ad000 ( 220 kB)
.data : 0xc0370725 - 0xc0473954 (1036 kB)
.text : 0xc0100000 - 0xc0370725 (2497 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency..
3979.55 BogoMIPS (lpj=1989779)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0c98)
net_namespace: 588 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:13.0 reg 10 32bit mmio: [c0005000, c0005fff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [c0006000, c0006fff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [c0007000, c0007fff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [84a0, 84af]
PCI: 0000:00:14.0 reg 14 32bit mmio: [c0004800, c0004bff]
PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:14.1 reg 18 io port: [170, 177]
PCI: 0000:00:14.1 reg 1c io port: [374, 377]
PCI: 0000:00:14.1 reg 20 io port: [84b0, 84bf]
PCI: 0000:00:14.2 reg 10 64bit mmio: [c0000000, c0003fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff]
PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff]
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: 0000:08:0a.0 reg 10 32bit mmio: [c0200000, c0201fff]
PCI: 0000:08:0b.0 reg 10 32bit mmio: [c0202000, c02027ff]
PCI: 0000:08:0b.0 reg 14 io port: [a400, a47f]
pci 0000:08:0b.0: supports D2
pci 0000:08:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:08:0b.0: PME# disabled
PCI: 0000:08:0d.0 reg 10 io port: [a000, a0ff]
PCI: 0000:08:0d.0 reg 14 32bit mmio: [c0202800, c02028ff]
pci 0000:08:0d.0: supports D1
pci 0000:08:0d.0: supports D2
pci 0000:08:0d.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:0d.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [a000, afff]
PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x68-0x68) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x6a-0x6a) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x6c-0x6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x6e-0x6e) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff),
disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8
(0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff),
disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff),
disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dca service started, version 1.4
PCI: Using ACPI for IRQ routing
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
NET: Registered protocol family 8
NET: Registered protocol family 20
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: iomem range 0xd0004c00-0xd0004cff has been reserved
system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
b43-pci-bridge 0000:08:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) ->
IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:08:0a.0
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [9000, 9fff]
bus: 01 index 1 mmio: [c0100000, c01fffff]
bus: 01 index 2 mmio: [c8000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, fff]
bus: 02 index 1 mmio: [0, fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 08 index 0 io port: [a000, afff]
bus: 08 index 1 mmio: [c0200000, c02fffff]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:01:05.0: Boot video device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
radeonfb 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: SEC
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:05.0): ATI Radeon 5975 "Yu"
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FN1] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (63 C)
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
fujitsu-laptop: driver 0.4.2 successfully loaded.
8139too Fast Ethernet driver 0.9.28
8139too 0000:08:0d.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xf8816800, 00:40:ca:d9:00:45, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x84b0-0x84b7
ide1: BM-DMA at 0x84b8-0x84bf
Probing IDE interface ide0...
hda: ST9808210A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all
legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
aoe: AoE v47 initialised.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 10, io mem 0xc0007000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
ALSA device list:
No soundcards found.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-37 processors (1
cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ]
EXT3 FS on hda7, internal journal
Adding 1502036k swap on /dev/hda6. Priority:-1 extents:1 across:1502036k
input: b43-phy0 as /class/input/input3
firmware: requesting b43/ucode5.fw
firmware: requesting b43/pcm5.fw
firmware: requesting b43/b0g0initvals5.fw
firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
b43-phy0 warning: You are using an old firmware image. Support for old firmware
will be removed in July 2008.
b43-phy0 warning: You must go to
http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the
latest firmware (version 4).
b43-phy0: Radio hardware status changed to DISABLED
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.27-gentoo-r8 #2
[<c0134fd7>] __report_bad_irq+0x24/0x69
[<c0134fde>] __report_bad_irq+0x2b/0x69
[<c01351c8>] note_interrupt+0x1ac/0x1e0
[<c013489f>] handle_IRQ_event+0x1a/0x3f
[<c013585a>] handle_level_irq+0x63/0x85
[<c0104d67>] do_IRQ+0x48/0x5d
[<c0103863>] common_interrupt+0x23/0x30
[<c0250d69>] acpi_idle_enter_c1+0xa5/0xdd
[<c02baba2>] cpuidle_idle_call+0x49/0x77
[<c01024e0>] cpu_idle+0x41/0x5a
=======================
handlers:
[<c029ce6e>] (usb_hcd_irq+0x0/0x52)
Disabling IRQ #10
b43-phy0: Radio turned off by software
eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
