On Sun, 2009-06-14 at 19:04 -0600, Maxim Wexler wrote: > Hi group, > > My fresh install of 2.6.29-r5 goes kablooey just after 'Loading module dm-mod' > > Then the boot console reports: > > Couldn't find device with uuid 'ldwVeS-gw14-HE42-M3Gw-DILI-Dbjh-2lHroF' > > and > > Couldn't find all physical volumes for volume group vg. > > and > > Volume group "vg" not found > > The above repeat several times until: 'Failed to setup the LVM'. Then > off course fsck.ext2 complains it can't find /dev/vg/usr and so on... > > My fllter in lvm.conf : filter = [ "a|/dev/sd[ab]|", "r/.*/"] which > corresponds to my Phison SSD and a 8G SD card. > > In /etc/fstab the logical volumes are listed like: > > /dev/vg/usr /usr ext2 noatime 0 2 # etc as per 'Gentoo LVM2 > installation' > > When I run the reactivate commands given at the end of the above > document all goes well except for: > > WARNING: Ignoring duplicate config node: filter (seeking filter) > > But /usr /home /tmp /opt are still empty and /var has only lib and > lock below it. > > The good news: it boots and lets me log in ;) > > Maxim
Hello :)
Have you tried with the default filter
filter = [ "r|/dev/nbd.*|", "a/.*/" ]
to be on the safe side?
Are you sure, that at the moment the script runs, the devices are
accessible? Maybe a module needs to load before dm-mod loads?
Bye,
Daniel
signature.asc
Description: This is a digitally signed message part
