hi -- if you're running the 'gravity and terrain module' of geosoft, then no need to do anything with the CG-3 or CG-5 'dump' files; the formatting of these ascii files should be recognized by the 'gravity and terrain module' and they'll go straight into a corresponding *.gdb. Some editing of the dumpt *.txt files might be required, depending upon your field practises, to ensure you've got a unique station identifier, but that aside, there shouldn't be any problems.
but John Hayles is quite correct; the CG-5 enables you to dump data via either a standard US-232C cable or via a USB port. Both options can be accessed through the SCTUTIL program which comes with your system ...the data can go straight to a directory on your laptop, or onto a USB key. Once there, you can then import to Geosoft. Kit. On 12-Apr-2013, at 4:18 AM, Venkat wrote: > Hi > > We have two CG-5 autograv meters along with geosoft..we are unable to connect > CG-5 to the geosoft .. > why it is happening..we are writing on a notebook while taking readings at > field.. > > can any one help me on this please.. > > -- > S.VENKATESWARA RAO > Sr.Geophysicist > Institute of Seismological Research > Next to PDPU,Raisan > Gandhinagar,Gujarat-382009 > mob:9824496343 > [email protected] > [email protected] > > --- > > Forum archives can be accessed here: > http://lyris.geosoft.com/read/?fourm=geonet > > You are currently subscribed to geonet as: [email protected]. > > To subscribe or unsubscribe from any of our forums, select the User Forum > selection on the Geosoft Community page: > http://www.geosoft.com/support/community > --- Forum archives can be accessed here: http://lyris.geosoft.com/read/?fourm=geonet You are currently subscribed to geonet as: [email protected]. To subscribe or unsubscribe from any of our forums, select the User Forum selection on the Geosoft Community page: http://www.geosoft.com/support/community
