Ciao Russell,
did you try setting the parameter I suggested?
That said, you have to check if the other images in the same mosaic have a
similar color model.
It might be worth to isolate 2/3 samples to reproduce the issue in case we
don't manage to find a fix.
Regards,
Simone Giannecchini
==
Our support, Your Success! Visit http://opensdi.geo-solutions.it for more
information.
==
Ing. Simone Giannecchini
@simogeo
Founder/Director
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
mob: +39 333 8128928
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
On Sat, Aug 31, 2013 at 2:53 PM, Russell Hore <r...@russ-hore.co.uk> wrote:
> Looking in geoserver.log the error seems to occur on file so00_1_5.tif
>
> gdalinfo on that file gives the following;
>
> Driver: GTiff/GeoTIFF
> Files: so00_1_5.tif
> Size is 1808, 2048
> Coordinate System is:
> PROJCS["OSGB 1936 / British National Grid",
> GEOGCS["OSGB 1936",
> DATUM["OSGB_1936",
> SPHEROID["Airy 1830",6377563.396,299.3249646000044,
> AUTHORITY["EPSG","7001"]],
> TOWGS84[446.448,-125.157,542.06,0.15,0.247,0.842,-20.489],
> AUTHORITY["EPSG","6277"]],
> PRIMEM["Greenwich",0],
> UNIT["degree",0.0174532925199433],
> AUTHORITY["EPSG","4277"]],
> PROJECTION["Transverse_Mercator"],
> PARAMETER["latitude_of_origin",49],
> PARAMETER["central_meridian",-2],
> PARAMETER["scale_factor",0.9996012717],
> PARAMETER["false_easting",400000],
> PARAMETER["false_northing",-100000],
> UNIT["metre",1,
> AUTHORITY["EPSG","9001"]],
> AUTHORITY["EPSG","27700"]]
> Origin = (381920.000000000000000,300000.000000000000000)
> Pixel Size = (10.000000000000000,-10.000000000000000)
> Metadata:
> AREA_OR_POINT=Area
> Image Structure Metadata:
> INTERLEAVE=BAND
> Corner Coordinates:
> Upper Left ( 381920.000, 300000.000) ( 2d16' 1.04"W, 52d35'49.69"N)
> Lower Left ( 381920.000, 279520.000) ( 2d15'57.03"W, 52d24'46.81"N)
> Upper Right ( 400000.000, 300000.000) ( 2d 0' 0.00"W, 52d35'50.77"N)
> Lower Right ( 400000.000, 279520.000) ( 2d 0' 0.00"W, 52d24'47.89"N)
> Center ( 390960.000, 289760.000) ( 2d 7'59.52"W, 52d30'19.06"N)
> Band 1 Block=512x512 Type=Byte, ColorInterp=Palette
> Color Table (RGB with 256 entries)
> 0: 89,72,73,255
> 1: 122,104,105,255
> 2: 153,136,137,255
> 3: 230,89,104,255
> 4: 218,9,56,255
> ….
>
> Russ
>
> On 30 Aug 2013, at 18:43, Simone Giannecchini <
> simone.giannecch...@geo-solutions.it> wrote:
>
> Ciao Russel,
> please, read below...
>
> Regards,
> Simone Giannecchini
> ==
> Our support, Your Success! Visit http://opensdi.geo-solutions.it for more
> information.
> ==
>
> Ing. Simone Giannecchini
> @simogeo
> Founder/Director
>
> GeoSolutions S.A.S.
> Via Poggio alle Viti 1187
> 55054 Massarosa (LU)
> Italy
> phone: +39 0584 962313
> fax: +39 0584 1660272
> mob: +39 333 8128928
>
> http://www.geo-solutions.it
> http://twitter.com/geosolutions_it
>
> -------------------------------------------------------
>
>
> On Fri, Aug 30, 2013 at 6:02 PM, Russell Hore <r...@russ-hore.co.uk>wrote:
>
>> Hi Simone,
>>
>> For information, gdalinfo on one of the original images, before I create
>> the pyramid gives the following lines, and lots more, but I see the
>> 'Palette' on the end
>>
>> Band 1 Block=512x512 Type=Byte, ColorInterp=Palette
>>
>> Overviews: 4000x4000, 2000x2000, 1000x1000, 500x500, 250x250, 125x125,
>> 63x63, 32x32
>> Color Table (RGB with 256 entries)
>>
>>
>> 1) There is no mosaic.properties but the pyramid.properties is
>>
>> #Automatically generated
>> #Thu Aug 29 07:48:00 BST 2013
>> Name=pyramid
>> Levels=2.5,2.5 5.0,5.0 10.0,10.0 20.0,20.0 40.0,40.0 80.0,80.0
>> 160.0,160.0 320.0,320.0 640.0,640.0 1280.0,1280.0
>> LevelsNum=10
>> Envelope2D=300000.0,200000.0 400000.0,300000.0
>> LevelsDirs=0 1 2 3 4 5 6 7 8 9
>>
>>
> There is inside each subdirectory. I would need to one for the level that
> fails.
>
>
>
>> 2) On one of the 'pyramid' images I get;
>>
>> Band 1 Block=512x512 Type=Byte, ColorInterp=Palette
>> Color Table (RGB with 256 entries)
>>
>> 3)
>> The log is over 3600 lines long.
>> I have put it on my server at http://russ-hore.co.uk/geoserver.log
>>
>>
> Yeah, it looks like we are mixing somehow paletted images with RGB images.
> You might want to try this quickly. Find the mosaic properties file doe
> the level that fails and make sure
> there is a line that says.
> *ExpandToRGB=true*
> *
> *
> (check this link for more info
> http://docs.geoserver.org/latest/en/user/tutorials/image_mosaic_plugin/imagemosaic.html#configuration-file
> )
>
> You might want to check that all your images are coherent that is, we are
> not mixing paletted imagery with RGB imagery. The parameter above would
> force paletted imagery
> to be expanded to RGB prior to mosaicking and might fix the issue right
> away.
>
>
>
>> Thanks for looking into this
>>
>> Russ
>>
>> On 30 Aug 2013, at 16:41, Simone Giannecchini <
>> simone.giannecch...@geo-solutions.it> wrote:
>>
>> Ciao Russell,
>> the suggestion from Andrea might be correct, although I see you do addo
>> with average interpolation (hence I don't think you have paletted images).
>>
>> It would be help out to have the following:
>>
>> -1- the mosaic.properties for the incriminated level
>> -2- the output of the gdalinfo on one of the files for this level
>> -3- a longer portion of the log that shows exactly from where this error
>> is thrown.
>>
>>
>> Regards,
>> Simone Giannecchini
>> ==
>> Our support, Your Success! Visit http://opensdi.geo-solutions.it for
>> more information.
>> ==
>>
>> Ing. Simone Giannecchini
>> @simogeo
>> Founder/Director
>>
>> GeoSolutions S.A.S.
>> Via Poggio alle Viti 1187
>> 55054 Massarosa (LU)
>> Italy
>> phone: +39 0584 962313
>> fax: +39 0584 1660272
>> mob: +39 333 8128928
>>
>> http://www.geo-solutions.it
>> http://twitter.com/geosolutions_it
>>
>> -------------------------------------------------------
>>
>>
>> On Thu, Aug 29, 2013 at 8:54 AM, Russell Hore <r...@russ-hore.co.uk>wrote:
>>
>>> I have a set of 100 tiles (UK Ordnance Survey data).
>>>
>>> I have created an image pyramid, created a store and added a layer.
>>>
>>> When I view it, via GeoServer preview, it all looks fine until I stat to
>>> zoom in. At a certain zoom level (The scale reads 1:87k) some of the tiles
>>> get drawn as white.
>>> So tiles are there at 1:174k, not there at 1:87k and back again at 1:44k
>>>
>>> When I look in the logs (catalina.out) I see the many lines with a line
>>> saying;
>>>
>>> ...
>>> Caused by: java.lang.IllegalArgumentException: All source images must
>>> have the same number of bands.
>>> …
>>>
>>> The source images all seem to have the same number of bands (1) and I do
>>> the following to create the pyramid
>>>
>>> #!/bin/bash
>>> echo -n Working on
>>> pwd
>>> mkdir out
>>> for file in `ls *tif`
>>> do
>>> echo -n Working on $file
>>> gdal_translate -of GTiff -co "TILED=YES" -co "COMPRESS=DEFLATE" -co
>>> "BLOCKXSIZE=512" -co "BLOCKYSIZE=512" -a_srs "EPSG:27700" $file out/$file
>>> done
>>> mv out/* .
>>> rm -fr out
>>> for file in `ls *tif`
>>> do
>>> echo -n Working on $file
>>> gdaladdo -clean $file
>>> gdaladdo -r average $file 1 2 4 8 16 32 64 128
>>> done
>>>
>>> Followed by
>>>
>>> #!/bin/bash
>>> export thedir=`pwd`
>>> export thedir=`basename $thedir`
>>> echo $thedir
>>> mkdir pyramid
>>> ls *tif > ../tiles$thedir.txt
>>> gdal_retile.py -v -levels 9 -ps 2048 2048 -co 'TILED=YES' -co
>>> 'BLOCKXSIZE=512' -co 'BLOCKYSIZE=512' -s_srs EPSG:27700 -targetDir pyramid
>>> --optfile ../tiles$thedir.txt
>>>
>>> I can post more of the log if required.
>>> I am hazarding a guess it is something to do with the version of Java.
>>> Do I need to go back to 1.6.*
>>>
>>> GeoServer 2.3.5
>>> Tomcat 7.0.35
>>> OpenSuse x64
>>> JVM Version Oracle Corporation: 1.7.0_40 (OpenJDK 64-Bit Server VM)
>>> Native JAI true Native JAI ImageIO true
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
>>> Discover the easy way to master current and previous Microsoft
>>> technologies
>>> and advance your career. Get an incredible 1,500+ hours of step-by-step
>>> tutorial videos with LearnDevNow. Subscribe today and save!
>>>
>>> http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
>>> _______________________________________________
>>> Geoserver-users mailing list
>>> Geoserver-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>>>
>>>
>>
>>
>
>
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
