Dear Stephen,
I would do the following:
- shut down tomcat
- make sure the user used to run Tomcat has correct privileges on the data dir
- change log level to verbose (you can edit the logging.xml file in
the data dir, see attache file)
- clean tmp and work directory for tomcat
- restart
If it works than we are done, otherwise send over the _full_ log
Regards,
Simone Giannecchini
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.
==
Ing. Simone Giannecchini
@simogeo
Founder/Director
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
mob: +39 333 8128928
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
On Thu, Jul 17, 2014 at 10:20 PM, Stephen Crawford <src...@psu.edu> wrote:
> Hello All,
>
> After a full disk issue, we made more room and rebooted. Tomcat starts up
> fine, but geoserver will not start. This GS instance has a lot of ascii
> grids served as out as pngs. Most of the error log seems to load layers OK,
> then it dies. The end off the error log is attached.
>
> Thanks,
> Steve
>
> --
> Stephen Crawford
> Center for Environmental Informatics
> The Pennsylvania State University
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds
> _______________________________________________
> Geoserver-users mailing list
> Geoserver-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
<logging>
<level>PRODUCTION_LOGGING.properties</level>
<location>logs/geoserver.log</location>
<stdOutLogging>false</stdOutLogging>
</logging>
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
