Hi Mark,
It sounds like your issue isn’t with GeoWebCache but layers further down the
stack (i.e. why seed/reseed don’t work).
Do WMS requests work? What error messages do they produce when you open the
image itself directly in the browser (rather than through a OpenLayers client,
which is what’s interpreting the errors and turning them into pink tiles)?
Also if you take a look at the log file (geoserver.log), that will likely have
a number of ERROR level events in to indicate what the problem may be.
Cheers,
Jonathan
From: Ismail, Mark [mailto:mark.ism...@knowsley.gov.uk]
Sent: Wednesday, October 08, 2014 3:01 PM
To: geoserver mailing list (geoserver-users@lists.sourceforge.net)
Subject: [Geoserver-users] 2.6 pink tiles
Hi
I upgraded to 2.6 today and am having some problems with my base maps
They are loading much slower and I am getting quite a few pink tiles
Assuming it was something to do with the geowebcache I have wiped it and am
trying to regenerate the tiles
The tasks are starting then when you click refresh they disappear and a few
files are appearing in the cache but it is not completing
I have tried seed and reseed with no luck
Any tips / tricks to get it working in 2.6 ?
Mark Ismail
Principal IT Officer
Tel: 0151 443 3021
Knowsley Council • Westmorland Road • Huyton • L36 9GL
Save time – use the IT Service Desk Self Serve<http://kmbcselfservice/>
Application
This e-mail and any attachments are confidential. It may contain privileged
information and is intended for the named recipient(s) only. It must not be
distributed without consent. If you are not one of the intended recipients,
please notify the sender immediately and do not disclose, distribute, or retain
this email or any part of it and do not take any action based on it.
Unless expressly stated, opinions in this email are those of the individual
sender, and not of Knowsley MBC. Legally binding obligations can only be
created for, or be entered into on behalf of, Knowsley MBC by duly authorised
officers or representatives.
Knowsley MBC excludes any liability whatsoever for any offence caused, any
direct or consequential loss arising from the use, or reliance on, this e-mail
or its contents. We believe but do not warrant that this e-mail and any
attachments are virus free. You must therefore take full responsibility for
virus checking and no responsibility is accepted for loss or damage arising
from viruses or changes made to this message after it was sent. Knowsley MBC
reserves the right to monitor and/or record all e-mail communications through
its network in accordance with relevant legislation.
This message has been scanned for viruses by
MailControl<http://www.mailcontrol.com/>, a service from BlackSpider Technology
Click
here<https://www.mailcontrol.com/sr/RQo1XBrSrPPGX2PQPOmvUqy!8K4P2+30BvY0pE5K2O3WE7+yHkkZO7HMmaV05UyNVvQoUpK7BqiNI5tH4SJ!Mg==>
to report this email as spam.
________________________________
HR Wallingford and its subsidiaries uses faxes and emails for confidential and
legally privileged business communications. They do not of themselves create
legal commitments. Disclosure to parties other than addressees requires our
specific consent. We are not liable for unauthorised disclosures nor reliance
upon them.
If you have received this message in error please advise us immediately and
destroy all copies of it.
HR Wallingford Limited
Howbery Park, Wallingford, Oxfordshire, OX10 8BA, United Kingdom
Registered in England No. 02562099
________________________________
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
