Hi Ben,
the ImagePyramid internally uses ImageMosaic reader: each level of the
pyramid is a mosaic of files.
Therefore, ImagePyramid can support any image format supported by
ImageMosaic.
About the JP2K issue you have, which JP2K Driver are you using?
(MrSID/Kakadu/ECW/...?)
Can you please share some logs about the JP2K import failure?
Best Regards,
Daniele
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.
==
Ing. Daniele Romagnoli
Senior Software Engineer
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
*AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
loro utilizzo è consentito esclusivamente al destinatario del messaggio,
per le finalità indicate nel messaggio stesso. Qualora riceviate questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla distruzione del messaggio
stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
utilizzarlo per finalità diverse, costituisce comportamento contrario ai
principi dettati dal D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely for
the attention and use of the named addressee(s) and may be confidential or
proprietary in nature or covered by the provisions of privacy act
(Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
Code).Any use not in accord with its purpose, any disclosure, reproduction,
copying, distribution, or either dissemination, either whole or partial, is
strictly forbidden except previous formal approval of the named
addressee(s). If you are not the intended recipient, please contact
immediately the sender by telephone, fax or e-mail and delete the
information in this message that has been received in error. The sender
does not give any warranty or accept liability as the content, accuracy or
completeness of sent messages and accepts no responsibility for changes
made after they were sent or for other risks which arise as a result of
e-mail transmission, viruses, etc.
On Wed, Feb 11, 2015 at 5:38 PM, Jonathan Moules <j.mou...@hrwallingford.com
> wrote:
> Hi Ben
>
> I don’t know the answer to your question, but suspect it’s only GeoTIFFs.
>
>
>
> More usefully however – did you use any compression on the tiles you
> created? If they’re aerial photo type things you can compress with JPEG
> compression for a very large saving. If they’re more thematic, you can use
> DEFLATE (lossless). The filesizes will still probably be a bit larger, but
> not 16 times so.
>
>
>
> Cheers,
>
> Jonathan
>
>
>
>
>
>
>
>
>
>
>
> *From:* Ben Johnson [mailto:weagl...@gmail.com]
> *Sent:* Tuesday, February 10, 2015 11:55 PM
> *To:* Andrea Aime
> *Cc:* Bistrais, Bob; GeoServer Mailing List List
> *Subject:* Re: [Geoserver-users] Best way to serve thousands of imagery
> files?
>
>
>
> So quick question. I created an image pyramid from my MrSID files and the
> resulting size was ~16* the size of the MrSID so I created an image pyramid
> of JP2K files instead because they get good compression and can be created
> using the gdal_retile tool however GeoServer fails to import an image
> pyramid of .jp2 files (I have the JPEG 2000 plugin properly included and
> see JP2K as a raster option). What imagery types are supported in a
> GeoServer image pyramid?
>
>
>
> On Tue, Feb 10, 2015 at 3:26 PM, Ben Johnson <weagl...@gmail.com> wrote:
>
> thanks for the help guys! ImagePyramid was the answer, and for anyone
> doing this later when you use the gdal_retile tool you will have to move
> the images in the base directory into a 0/ directory as Andrea pointed out!
>
> Thanks a lot!
>
>
>
> On Fri, Feb 6, 2015 at 11:47 AM, Andrea Aime <andrea.a...@geo-solutions.it>
> wrote:
>
> On Fri, Feb 6, 2015 at 12:14 AM, Ben Johnson <weagl...@gmail.com> wrote:
>
> So I created an ImagePyramid using gdal from command line and got a
> directory structure of the images at different resolutions.. when I tried
> to use this directory via the web interface by following the instructions
> in the documentation I was unable to use the ImagePyramid because the
> geoserver web interface is expecting a file and not a directory path. How
> do I import an ImagePyramid into geoserver?
>
>
>
> Weird? The image pyramid was accepting a directory too, and in case it was
> generated by gdal_relatile, it was also
>
> going to reshuffle it a bit (moving all the files in the root directory in
> a 0/ folder, as we cannot have files in the
>
> root folder).
>
>
>
> Wondering... is GeoServer able to write to that path? Maybe it failed
> because it could not move around the files?
>
>
>
> Cheers
>
> Andrea
>
>
>
> --
>
> ==
>
> GeoServer Professional Services from the experts! Visit
>
> http://goo.gl/NWWaa2 for more information.
>
> ==
>
>
>
> Ing. Andrea Aime
>
> @geowolf
>
> Technical Lead
>
>
>
> GeoSolutions S.A.S.
>
> Via Poggio alle Viti 1187
>
> 55054 Massarosa (LU)
>
> Italy
>
> phone: +39 0584 962313
>
> fax: +39 0584 1660272
>
> mob: +39 339 8844549
>
>
>
> http://www.geo-solutions.it
>
> http://twitter.com/geosolutions_it
>
>
>
> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>
> Le informazioni contenute in questo messaggio di posta elettronica e/o
> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
> loro utilizzo è consentito esclusivamente al destinatario del messaggio,
> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
> darcene notizia via e-mail e di procedere alla distruzione del messaggio
> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
> utilizzarlo per finalità diverse, costituisce comportamento contrario ai
> principi dettati dal D.Lgs. 196/2003.
>
>
>
> The information in this message and/or attachments, is intended solely for
> the attention and use of the named addressee(s) and may be confidential or
> proprietary in nature or covered by the provisions of privacy act
> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
> Code).Any use not in accord with its purpose, any disclosure, reproduction,
> copying, distribution, or either dissemination, either whole or partial, is
> strictly forbidden except previous formal approval of the named
> addressee(s). If you are not the intended recipient, please contact
> immediately the sender by telephone, fax or e-mail and delete the
> information in this message that has been received in error. The sender
> does not give any warranty or accept liability as the content, accuracy or
> completeness of sent messages and accepts no responsibility for changes
> made after they were sent or for other risks which arise as a result of
> e-mail transmission, viruses, etc.
>
>
>
> -------------------------------------------------------
>
>
>
>
>
>
>
> This message has been scanned for viruses by MailControl
> <http://www.mailcontrol.com/>, a service from BlackSpider Technology
>
> Click here
> <https://www.mailcontrol.com/sr/mSsKh4vvFEXGX2PQPOmvUoRq5N+0kMbNGzG3k5xQxsBz9ZXj0zPX89yekGabpg5qKlZQ6twyz0D3KeH4!zzvzA==>
> to report this email as spam.
>
>
>
> ------------------------------
>
> *HR Wallingford and its subsidiaries* uses faxes and emails for
> confidential and legally privileged business communications. They do not of
> themselves create legal commitments. Disclosure to parties other than
> addressees requires our specific consent. We are not liable for
> unauthorised disclosures nor reliance upon them.
> If you have received this message in error please advise us immediately
> and destroy all copies of it.
>
> HR Wallingford Limited
> Howbery Park, Wallingford, Oxfordshire, OX10 8BA, United Kingdom
> Registered in England No. 02562099
>
> ------------------------------
>
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming. The Go Parallel Website,
> sponsored by Intel and developed in partnership with Slashdot Media, is
> your
> hub for all things parallel software development, from weekly thought
> leadership blogs to news, videos, case studies, tutorials and more. Take a
> look and join the conversation now. http://goparallel.sourceforge.net/
> _______________________________________________
> Geoserver-users mailing list
> Geoserver-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
