Andrea Thanks for the quick response and sorry for not getting back sooner.
Polygon as in a large gray square. I can zoom in and out, just no map. It's all gray. It was imported as the raster layer. Below is the output from gdalinfo C:\Program Files\GDAL>gdalinfo c:\maps\geoserver-2.7.2\data_dir\alaska.tiff ERROR 1: Can't load requested DLL: C:\Program Files\GDAL\gdalplugins\gdal_MrSID.dll 126: The specified module could not be found. ERROR 1: Can't load requested DLL: C:\Program Files\GDAL\gdalplugins\gdal_MrSID.dll 126: The specified module could not be found. Driver: GTiff/GeoTIFF Files: c:\maps\geoserver-2.7.2\data_dir\alaska.tiff Size is 29184, 18432 Coordinate System is `' GCP Projection = GEOGCS["WGS 84", DATUM["WGS_1984", SPHEROID["WGS 84",6378137,298.257223563, AUTHORITY["EPSG","7030"]], AUTHORITY["EPSG","6326"]], PRIMEM["Greenwich",0], UNIT["degree",0.0174532925199433], AUTHORITY["EPSG","4326"]] GCP[ 0]: Id=1, Info= (0,0) -> (-116.680203045685,34.7986191024166,0) GCP[ 1]: Id=2, Info= (29184,0) -> (-111.472081218274,34.7986191024166,0) GCP[ 2]: Id=3, Info= (0,18432) -> (-116.680203045685,32.313003452244,0) GCP[ 3]: Id=4, Info= (29184,18432) -> (-111.472081218274,32.313003452244,0) Metadata: AREA_OR_POINT=Area TIFFTAG_DATETIME=2015:09:16 17:47:52 TIFFTAG_IMAGEDESCRIPTION=com.partech.geoio.rpf.BoundaryRectangle@164cf04 TIFFTAG_RESOLUTIONUNIT=3 (pixels/cm) TIFFTAG_SOFTWARE=GV TIFFTAG_XRESOLUTION=1 TIFFTAG_YRESOLUTION=1 Image Structure Metadata: INTERLEAVE=PIXEL Corner Coordinates: Upper Left ( 0.0, 0.0) Lower Left ( 0.0,18432.0) Upper Right (29184.0, 0.0) Lower Right (29184.0,18432.0) Center (14592.0, 9216.0) Band 1 Block=128x128 Type=Byte, ColorInterp=Red Mask Flags: PER_DATASET ALPHA Band 2 Block=128x128 Type=Byte, ColorInterp=Green Mask Flags: PER_DATASET ALPHA Band 3 Block=128x128 Type=Byte, ColorInterp=Blue Mask Flags: PER_DATASET ALPHA Band 4 Block=128x128 Type=Byte, ColorInterp=Alpha On Wed, Sep 16, 2015 at 6:46 PM, Andrea Aime <andrea.a...@geo-solutions.it> wrote: > On Thu, Sep 17, 2015 at 12:28 AM, Alex O'Ree <spyhunte...@gmail.com> wrote: >> >> After importing a geotiff in a data store (no errors), then going to >> preview layer using open layers, I see nothing but a large gray >> polygon. Is there anything I can do to help troubleshoot this? I can >> view the tiff in graphics editing/viewing problems. It's a 2GB file, >> not sure if that's relevant or not. >> > > Polygon as in .... vector polygon? Did you associate the polygon > style instead of the raster one by any chance? > If not, can you run gdalinfo against that file, and provide the geoserver > version you're using? > > Cheers > Andrea > > -- > == > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > == > > Ing. Andrea Aime > @geowolf > Technical Lead > > GeoSolutions S.A.S. > Via Poggio alle Viti 1187 > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 339 8844549 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 > > Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i > file/s allegato/i sono da considerarsi strettamente riservate. Il loro > utilizzo è consentito esclusivamente al destinatario del messaggio, per le > finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio > senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia > via e-mail e di procedere alla distruzione del messaggio stesso, > cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo > anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per > finalità diverse, costituisce comportamento contrario ai principi dettati > dal D.Lgs. 196/2003. > > > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or partial, is > strictly forbidden except previous formal approval of the named > addressee(s). If you are not the intended recipient, please contact > immediately the sender by telephone, fax or e-mail and delete the > information in this message that has been received in error. The sender does > not give any warranty or accept liability as the content, accuracy or > completeness of sent messages and accepts no responsibility for changes > made after they were sent or for other risks which arise as a result of > e-mail transmission, viruses, etc. > > > ------------------------------------------------------- ------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ Geoserver-users mailing list Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users