Hi Elam, The user docs have good information on setting up security: https://docs.geoserver.org/latest/en/user/security/index.html#security
From: Elham soudy [mailto:e.so...@penta-b.com] Sent: Wednesday, 13 May 2020 1:23 PM To: geoserver-users@lists.sourceforge.net; Daniele Romagnoli <daniele.romagn...@geo-solutions.it> Subject: [Geoserver-users] Geoserver Security hi all I need to know how to set the layer configuration to let it be read only yours, elham ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission.
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
