Christopher, You might have sent it just to me. It's okay though.
I've only been using this code a couple of months, but here's my understanding: Version 2.3 is about to be released, and there are quite a few changes, including removal of code that has been deprecated but is still available. After 2.3 is released, it should become pretty stable with exceptions of course. I know that the raster code is going to have some big changes, but I'm not sure how that will play out if you're only using implementations of the main interfaces. Right now, they are recommending that most people use 2.2.1, and personally, if I were starting out, I would use that version then switch as soon as they officially release 2.3. Good luck! Best regards, Amy Christopher Jon Jursa wrote: > Amy, > > Thanks again. I just found out I used an older verision with different > classpaths *smacks self on head*. > > What is the best version I should use from the downloads available? > > BTW, did I send the last message to you personally? I didn't mean to and I > apologize. > > Sincerely, > > Christopher Jon Jursa > Geoinformatics Laboratory > School of Information Sciences > University of Pittsburgh > web: http://gis.sis.pitt.edu > email: [EMAIL PROTECTED] > phone: 412-624-8858 > > -----Original Message----- > From: Amy Johnson [mailto:[EMAIL PROTECTED] > Sent: Friday, November 10, 2006 8:00 PM > To: Christopher Jon Jursa > Subject: Re: [Geotools-devel] Compile error (can't find packages in > libraries) > > > Christopher, > > Can you check your classpath and make sure it's correct? I went through > all of the libraries you're referencing, and it's complete, so it should > at least find the classes you're trying to reference. > > Amy > > Christopher Jon Jursa wrote: > >> Amy, >> >> Thanks for the reply. I must have missed it. >> >> I am just trying to get a program to compile/run. >> >> Again, my code is at >> http://gis.sis.pitt.edu/temp/chris/geotools/HouseFeatureHelper.java >> >> My classpath is at >> http://gis.sis.pitt.edu/temp/chris/geotools/setClasspath.txt >> >> My errors are at http://gis.sis.pitt.edu/temp/chris/geotools/error.txt >> >> The classpath is correct but as you can see from the errors, the libaries >> > in > >> the jar files (in the classpaths) are not being found. >> >> What am I doing wrong? I shouldn't need a project for this to work. >> >> Sincerely, >> >> Christopher Jon Jursa >> Geoinformatics Laboratory >> School of Information Sciences >> University of Pittsburgh >> web: http://gis.sis.pitt.edu >> email: [EMAIL PROTECTED] >> phone: 412-624-8858 >> >> Re: [Geotools-devel] Compile error (can't find packages in libraries) >> From: Amy Johnson <[EMAIL PROTECTED]> - 2006-11-09 17:22 >> >> Christopher, >> >> I stuck the code in a project, and it recognized all the libraries. >> There were some other mistakes though. Are you trying to do anything in >> particular, or are you just trying to get something to run? >> >> Regards, >> >> Amy >> >> Christopher Jon Jursa wrote: >> > Hello, >> > >> > I am new to Geotools. I have downloaded and unzipped Geotools >> gt2-2.2-RC3. >> > >> > I have set my classpath to the (#1 attachment) setClasspath.txt file. >> This >> > file sets up my classpath to include all jars in the unzipped >> > gt2-2.2-RC3 > >> > directory. >> > >> > I am attempting to compile the (#2 attachment) HouseFeatureHelper.java >> file >> > from the Geotools website. >> > >> > However, I keep getting compilation errors saying the libraries (and >> > consequently the classes) are not being found. >> > >> > For instance, the first few lines of the compilation error are in the >> > (#3 > >> > attachment) error.txt file. >> > >> > What am I doing wrong? Why won't my JVM recognize the libraries in the >> > jars? >> > >> > Thank you for your time in reading. >> > >> > Sincerely, >> > >> > Christopher Jon Jursa >> > Geoinformatics Laboratory >> > School of Information Sciences >> > University of Pittsburgh >> > web: http://gis.sis.pitt.edu >> > email: [EMAIL PROTECTED] >> > phone: 412-624-8858 >> > >> >> > > ------------------------------------------------------------------------ > >> > >> > set GEOTOOLSPATH=C:\temp\work\geotools\gt2-2.2-RC3-bin\gt2-2.2-RC3 >> > >> > set >> >> > CLASSPATH=.;C:\apache\tomcat\common\lib\servlet-api.jar;%XERCES_PATH%\xjpars > > e-1.0.jar;%XERCES_PATH%\xercesImpl.jar;%XERCES_PATH%\resolver.jar;%XERCES_PA > >> TH%\xjparse-1.0.jar;C:\Program >> >> > Files\Java\jre1.5.0_06\lib\ext\QTJava.zip;C:\apache\tomcat\common\lib\mysql- > >> connector-java-3.1.13-bin.jar >> > >> > dir /b *.jar > jarFiles.txt >> > >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-awt-util-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-bridge-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-css-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-dom-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-ext-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-gvt-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-parser-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-script-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-svg-dom-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-svggen-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-transcoder-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-util-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\batik-xml-1.6.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\beam-1.0.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\commons-lang-2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\concurrent-1.3.4.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\db2jcc_dummy-8.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\geoapi-2.0.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-api-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-arcgrid-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-brewer-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-coverage-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-db2-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-demo-example-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-demo-mappane-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-demo-property-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-directory-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-epsg-access-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-epsg-hsql-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-epsg-postgresql-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-epsg-wkt-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-geomedia-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-geotiff-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-gml-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-go-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-graph-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-gtopo30-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-hsql-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-image-2.2.1.jar >> > set >> > CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-indexed-shapefile-2.2.1.jar > >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-main-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-mappane-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-mif-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-mysql-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-openoffice-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-oracle-spatial-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-pickle-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-postgis-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-referencing-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-render-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-sample-data-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-shapefile-2.2.1.jar >> > set >> > CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-shapefile-renderer-2.2.1.jar > >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-svgsupport-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-tiger-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-validation-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-vpf-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-wfs-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-widgets-swing-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\gt2-wms-2.2.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\hsqldb-1.8.0.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\jdbc-stdext-2.0.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\jdom-1.0.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\jlfgr-1.0.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\jsr108-0.01.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\jta-1.0.1B.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\jts-1.7.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\log4j-1.2.6.jar >> > set >> > CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\mysql-connector-java-3.0.10.jar > >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\postgis-driver-1.0.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\postgresql-8.1-407.jdbc3.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\spatialdb-0.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\vecmath-1.3.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\velocity-1.4.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\velocity-dep-1.4.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\wkb4j-1.0-RC1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\xercesImpl-2.7.1.jar >> > set CLASSPATH=%CLASSPATH%;%GEOTOOLSPATH%\xml-apis-xerces-2.7.1.jar >> > >> >> > > ------------------------------------------------------------------------ > >> > >> > C:\temp\work\geotools>javac HouseFeatureHelper.java >> > HouseFeatureHelper.java:7: package org.geotools.data does not exist >> > import org.geotools.data.DataSourceException; >> > ^ >> > HouseFeatureHelper.java:8: package org.geotools.feature does not exist >> > import org.geotools.feature.AttributeType; >> > ^ >> > HouseFeatureHelper.java:9: package org.geotools.feature does not exist >> > import org.geotools.feature.AttributeTypeFactory; >> > ^ >> > HouseFeatureHelper.java:10: package org.geotools.feature does not exist >> > import org.geotools.feature.DefaultFeature; >> > ^ >> > HouseFeatureHelper.java:11: package org.geotools.feature does not exist >> > import org.geotools.feature.DefaultFeatureCollection; >> > ^ >> > HouseFeatureHelper.java:12: package org.geotools.feature does not exist >> > import org.geotools.feature.DefaultFeatureType; >> > ^ >> > HouseFeatureHelper.java:13: package org.geotools.feature does not exist >> > import org.geotools.feature.Feature; >> > ^ >> > HouseFeatureHelper.java:14: package org.geotools.feature does not exist >> > import org.geotools.feature.FeatureCollection; >> > ^ >> > HouseFeatureHelper.java:15: package org.geotools.feature does not exist >> > import org.geotools.feature.FeatureTypeFactory; >> > ^ >> > HouseFeatureHelper.java:16: package org.geotools.feature does not exist >> > import org.geotools.feature.GeometryAttributeType; >> > ^ >> > HouseFeatureHelper.java:17: package org.geotools.feature does not exist >> > import org.geotools.feature.IllegalAttributeException; >> > ^ >> > HouseFeatureHelper.java:18: package org.geotools.feature does not exist >> > import org.geotools.feature.SchemaException; >> > ^ >> > HouseFeatureHelper.java:19: package org.geotools.map does not exist >> > import org.geotools.map.DefaultMapLayer; >> > ^ >> > HouseFeatureHelper.java:20: package org.geotools.map does not exist >> > import org.geotools.map.MapLayer; >> > ^ >> > HouseFeatureHelper.java:21: package org.geotools.styling does not exist >> > import org.geotools.styling.Style; >> >> > > ------------------------------------------------------------------------ > >> > >> >> > > ------------------------------------------------------------------------- > >> > Using Tomcat but need to do more? Need to support web services, >> > security? > >> > Get stuff done quickly with pre-integrated technology to make your job >> easier >> > Download IBM WebSphere Application Server v.1.0.1 based on Apache >> Geronimo >> > >> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > > > ------------------------------------------------------------------------ > >> > >> > _______________________________________________ >> > Geotools-devel mailing list >> > [EMAIL PROTECTED] >> > https://lists.sourceforge.net/lists/listinfo/geotools-devel >> > >> >> >> >> ------------------------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, security? >> Get stuff done quickly with pre-integrated technology to make your job >> > easier > >> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> Geotools-devel mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/geotools-devel >> >> >> > > > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Geotools-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/geotools-devel
