Hello Jenkins Builder, neels, pespin, I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-bsc/+/24548 to look at the new patch set (#3). Change subject: Make interference measurement parameters configurable ...................................................................... Make interference measurement parameters configurable According to 3GPP TS 45.008, the BSS shall monitor the levels of interference on its IDLE traffic channels. The actual measurements are performed in the BTS and then reported to the BSC over the A-bis/RSL link(s) in RF RESource INDication messages. 3GPP TS 45.008 defines the following measurement parameters: * Intave: Interference Averaging period (see table A.1), * Interference level Boundaries (see table A.1). Both parameters are sent to the BTS over the A-bis/OML, and can now be configured via the VTY interface. Only those BTS models which 'speak' the OML protocol defined in 3GPP TS 52.021 will actually get the configured parameters, others will keep using the hard-coded parameters. Change-Id: I99ebf57aac1f3ca7e0497c3b4f6b0738c6ed7e47 Related: SYS#5313, OS#1866 --- M include/osmocom/bsc/bts.h M include/osmocom/bsc/gsm_data.h M src/osmo-bsc/bsc_vty.c M src/osmo-bsc/bts.c M src/osmo-bsc/bts_ipaccess_nanobts_omlattr.c M src/osmo-bsc/gsm_data.c M tests/Makefile.am A tests/interf_meas.vty 8 files changed, 139 insertions(+), 5 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/48/24548/3 -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/24548 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I99ebf57aac1f3ca7e0497c3b4f6b0738c6ed7e47 Gerrit-Change-Number: 24548 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanits...@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofm...@sysmocom.de> Gerrit-Reviewer: pespin <pes...@sysmocom.de> Gerrit-MessageType: newpatchset