Change in simtrace2[master]: firmware: octsimtest: ensure all card_insert GPIO are 0 after reset

[laforge]

laforge has uploaded this change for review. ( 
https://gerrit.osmocom.org/c/simtrace2/+/24573 )


Change subject: firmware: octsimtest: ensure all card_insert GPIO are 0 after 
reset
......................................................................

firmware: octsimtest: ensure all card_insert GPIO are 0 after reset

Change-Id: I3c3744673ba53750cb66aa5023c8228edb006bfc
---
M firmware/libboard/octsimtest/source/board_octsimtest.c
1 file changed, 3 insertions(+), 1 deletion(-)



  git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/73/24573/1

diff --git a/firmware/libboard/octsimtest/source/board_octsimtest.c 
b/firmware/libboard/octsimtest/source/board_octsimtest.c
index c77c1ce..d8b1cc4 100644
--- a/firmware/libboard/octsimtest/source/board_octsimtest.c
+++ b/firmware/libboard/octsimtest/source/board_octsimtest.c
@@ -79,8 +79,10 @@
        mux_init();
        i2c_pin_init();
        /* PORT A: all outputs, Port B0 output, B1..B7 unused */
-       if (mcp23017_init(MCP23017_ADDRESS, 0x00, 0xfe) == 0)
+       if (mcp23017_init(MCP23017_ADDRESS, 0x00, 0xfe) == 0) {
                mcp2317_present = true;
+               mcp23017_set_output_a(MCP23017_ADDRESS, 0);
+       }
        /* Initialize checking for card insert/remove events */
        //card_present_init();
 #endif

--
To view, visit https://gerrit.osmocom.org/c/simtrace2/+/24573
To unsubscribe, or for help writing mail filters, visit 
https://gerrit.osmocom.org/settings

Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-Change-Id: I3c3744673ba53750cb66aa5023c8228edb006bfc
Gerrit-Change-Number: 24573
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <lafo...@osmocom.org>
Gerrit-MessageType: newchange