laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-e1-hardware/+/26949 )
Change subject: icE1usb doc: Add pictures of front and back side ...................................................................... icE1usb doc: Add pictures of front and back side Closes: OS#5406 Change-Id: Ifc382c762119b397dd9a6b484ebc9a237897fba9 --- M doc/manuals/chapters/hardware.adoc A doc/manuals/images/icE1usb-e1_side.jpg A doc/manuals/images/icE1usb-usb_side.jpg 3 files changed, 19 insertions(+), 1 deletion(-) Approvals: laforge: Looks good to me, approved Jenkins Builder: Verified diff --git a/doc/manuals/chapters/hardware.adoc b/doc/manuals/chapters/hardware.adoc index 8055e64..0e129c2 100644 --- a/doc/manuals/chapters/hardware.adoc +++ b/doc/manuals/chapters/hardware.adoc @@ -19,7 +19,14 @@ PDF rendered schematics are available at https://git.osmocom.org/osmo-e1-hardware/plain/hardware/icE1usb/r1.0/icE1usb.pdf -=== Connectors +=== Connectors on E1 side + +image::images/icE1usb-e1_side.jpg[width=400,title="E1 side of icE1usb"] + +From left to right, there are the following connectors: + +* X5A: Primary E1 Port +* X5B: Secondary E1 Port ==== X5A and X5B: E1 Interface Connectors @@ -57,6 +64,17 @@ different pin-out. Particularly, you cannot use an Ethernet cross-over cable as an E1 cross-over! +=== Connectors on USB side + +image::images/icE1usb-usb_side.jpg[width=400,title="USB side of icE1usb"] + +From left to right, there are the following connectors: + +* X1: GPS Antenna Connector +* X2: Serial Console Connector +* X4: USB Connector +* X3: GPIO / Extension Connector + ==== X4: USB Connector The USB connector is a USB Type C connector. However, it only carries diff --git a/doc/manuals/images/icE1usb-e1_side.jpg b/doc/manuals/images/icE1usb-e1_side.jpg new file mode 100644 index 0000000..5bd274d --- /dev/null +++ b/doc/manuals/images/icE1usb-e1_side.jpg Binary files differ diff --git a/doc/manuals/images/icE1usb-usb_side.jpg b/doc/manuals/images/icE1usb-usb_side.jpg new file mode 100644 index 0000000..5d833d6 --- /dev/null +++ b/doc/manuals/images/icE1usb-usb_side.jpg Binary files differ -- To view, visit https://gerrit.osmocom.org/c/osmo-e1-hardware/+/26949 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1-hardware Gerrit-Branch: master Gerrit-Change-Id: Ifc382c762119b397dd9a6b484ebc9a237897fba9 Gerrit-Change-Number: 26949 Gerrit-PatchSet: 2 Gerrit-Owner: laforge <lafo...@osmocom.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <lafo...@osmocom.org> Gerrit-MessageType: merged
