Review at https://gerrit.osmocom.org/5133
measurement.c: Fix various typos in comments Change-Id: Ief208045664769406cd60a92a12c4b44988a98b4 --- M src/common/measurement.c 1 file changed, 8 insertions(+), 8 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/33/5133/1 diff --git a/src/common/measurement.c b/src/common/measurement.c index 3b32bf2..36120c0 100644 --- a/src/common/measurement.c +++ b/src/common/measurement.c @@ -8,8 +8,8 @@ #include <osmo-bts/logging.h> #include <osmo-bts/measurement.h> -/* Measurment reporting period and mapping of SACCH message block for TCHF - * and TCHH chan As per in 3GPP TS 45.008, secton 8.4.1. +/* Measurement reporting period and mapping of SACCH message block for TCHF + * and TCHH chan As per in 3GPP TS 45.008, section 8.4.1. * * Timeslot number (TN) TDMA frame number (FN) modulo 104 * Half rate, Half rate, Reporting SACCH @@ -54,7 +54,7 @@ [7] = 77, }; -/* Measurment reporting period for SDCCH8 and SDCCH4 chan +/* Measurement reporting period for SDCCH8 and SDCCH4 chan * As per in 3GPP TS 45.008, section 8.4.2. * * Logical Chan TDMA frame number @@ -64,7 +64,7 @@ * SDCCH/4 37 to 36 */ -/* Added interleve offset to Meas period end Fn which +/* Added interleave offset to Meas period end Fn which * would reduce the Meas Res msg load at Abis */ static const uint8_t sdcch8_meas_rep_fn102[] = { @@ -86,14 +86,14 @@ }; /* Note: The reporting of the measurement results is done via the SACCH channel. - * The measurement interval is not alligned with the interval in which the - * SACCH is tranmitted. When we receive the measurement indication with the - * SACCH block, the coresponding measurement interval will already have ended + * The measurement interval is not aligned with the interval in which the + * SACCH is transmitted. When we receive the measurement indication with the + * SACCH block, the corresponding measurement interval will already have ended * and we will get the results late, but on spot with the beginning of the * next measurement interval. * * For example: We get a measurement indication on FN%104=38 in TS=2. Then we - * will have to look at 3GPP TS 45.008, secton 8.4.1 (or 3GPP TS 05.02 Clause 7 + * will have to look at 3GPP TS 45.008, section 8.4.1 (or 3GPP TS 05.02 Clause 7 * Table 1 of 9) what value we need to feed into the lookup tables in order to * detect the measurement period ending. In this example the "real" ending * was on FN%104=12. This is the value we have to look for in -- To view, visit https://gerrit.osmocom.org/5133 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ief208045664769406cd60a92a12c4b44988a98b4 Gerrit-PatchSet: 1 Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Owner: Harald Welte <lafo...@gnumonks.org>