pespin has uploaded this change for review. ( 
https://gerrit.osmocom.org/c/docker-playground/+/34715?usp=email )


Change subject: Introduce ttcn3-hss-test-ogs
......................................................................

Introduce ttcn3-hss-test-ogs

Related: SYS#6588
Depends: osmo-ttcn3-hacks.git Ic2fccd9c54aea04f1a31649a0af47c974939fb2f
Change-Id: Iebeefd9689ae2efa54678b99ff929ca255ec64d1
---
A ttcn3-hss-test-ogs/Dockerfile
A ttcn3-hss-test-ogs/Makefile
A ttcn3-hss-test-ogs/jenkins.sh
A ttcn3-hss-test-ogs/ogs/HSS_Tests.cfg
A ttcn3-hss-test-ogs/ogs/freediameter.conf
A ttcn3-hss-test-ogs/ogs/mongod.conf
A ttcn3-hss-test-ogs/ogs/open5gs-hss.yaml
7 files changed, 503 insertions(+), 0 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/docker-playground 
refs/changes/15/34715/1

diff --git a/ttcn3-hss-test-ogs/Dockerfile b/ttcn3-hss-test-ogs/Dockerfile
new file mode 100644
index 0000000..f8ae830
--- /dev/null
+++ b/ttcn3-hss-test-ogs/Dockerfile
@@ -0,0 +1,21 @@
+ARG    REGISTRY
+ARG    USER
+FROM   $REGISTRY/$USER/debian-bookworm-titan
+
+RUN    apt-get update && \
+       apt-get upgrade -y && \
+       DEBIAN_FRONTEND='noninteractive' apt-get install -y 
--no-install-recommends --no-install-suggests \
+               libgnutls28-dev \
+               && \
+       apt-get clean
+
+ARG    OSMO_TTCN3_BRANCH="master"
+
+ADD    
https://gerrit.osmocom.org/plugins/gitiles/osmo-ttcn3-hacks/+/$OSMO_TTCN3_BRANCH?format=TEXT
 /tmp/commit
+RUN    ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" hss
+
+VOLUME /data
+
+COPY   ogs/HSS_Tests.cfg /data/HSS_Tests.cfg
+
+CMD    ttcn3-docker-run hss HSS_Tests
diff --git a/ttcn3-hss-test-ogs/Makefile b/ttcn3-hss-test-ogs/Makefile
new file mode 100644
index 0000000..8d0e10b
--- /dev/null
+++ b/ttcn3-hss-test-ogs/Makefile
@@ -0,0 +1 @@
+include ../make/Makefile
diff --git a/ttcn3-hss-test-ogs/jenkins.sh b/ttcn3-hss-test-ogs/jenkins.sh
new file mode 100755
index 0000000..5ca59a9
--- /dev/null
+++ b/ttcn3-hss-test-ogs/jenkins.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+
+. ../jenkins-common.sh
+
+IMAGE_SUFFIX="${IMAGE_SUFFIX:-master}"
+docker_images_require \
+       "open5gs-$IMAGE_SUFFIX" \
+       "ttcn3-hss-test-ogs"
+
+set_clean_up_trap
+set -e
+
+mkdir -p $VOL_BASE_DIR/mongo/db
+cp ogs/mongod.conf $VOL_BASE_DIR/mongo/
+
+mkdir $VOL_BASE_DIR/hss-tester
+cp ogs/HSS_Tests.cfg $VOL_BASE_DIR/hss-tester/
+write_mp_osmo_repo "$VOL_BASE_DIR/hss-tester/HSS_Tests.cfg"
+
+mkdir $VOL_BASE_DIR/hss
+cp ogs/open5gs-*.yaml $VOL_BASE_DIR/hss/
+cp ogs/freediameter.conf $VOL_BASE_DIR/hss/
+
+network_create
+network_replace_subnet_in_configs
+
+# start container with mongod in background
+docker run     --rm --user $(id -u) \
+               $(docker_network_params $SUBNET 103) \
+               --ulimit core=-1 \
+               -v $VOL_BASE_DIR/mongo:/data \
+               --name ${BUILD_TAG}-mongo -d \
+               $DOCKER_ARGS \
+               $REPO_USER/open5gs-$IMAGE_SUFFIX \
+               /bin/sh -c "mongod -f /data/mongod.conf >/data/mongod.out 2>&1"
+
+# mongod needs some time to bootstrap...
+while ! nc -z 172.18.$SUBNET.103 27017; do sleep 1; done
+
+# create a test subscriber with IMSI=001010000000000
+docker run     --rm \
+               $(docker_network_params $SUBNET 8) \
+               $REPO_USER/open5gs-$IMAGE_SUFFIX \
+               open5gs-dbctl --db_uri=mongodb://172.18.$SUBNET.103/open5gs \
+                       add 001010000000000 \
+                               3c6e0b8a9c15224a8228b9a98ca1531d \
+                               762a2206fe0b4151ace403c86a11e479
+
+# start container with hss in background
+docker run     --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+               --rm \
+               --ulimit core=-1 \
+               -v $VOL_BASE_DIR/hss:/data \
+               --name ${BUILD_TAG}-ogs-hss -d \
+               $DOCKER_ARGS \
+               $(docker_network_params $SUBNET 201) \
+               $REPO_USER/open5gs-$IMAGE_SUFFIX \
+               /bin/sh -c "open5gs-hssd -c /data/open5gs-hss.yaml 
>/data/open5gs-hssd.out 2>&1"
+
+# start docker container with testsuite in foreground
+docker run     --rm \
+               --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+               $(docker_network_params $SUBNET 202) \
+               --ulimit core=-1 \
+               -v $VOL_BASE_DIR/hss-tester:/data \
+               -e "TTCN3_PCAP_PATH=/data" \
+               --name ${BUILD_TAG}-hss-test \
+               $DOCKER_ARGS \
+               $REPO_USER/ttcn3-hss-test-ogs
+
+# remove mongodb's database
+rm -rf $VOL_BASE_DIR/mongo/db/
diff --git a/ttcn3-hss-test-ogs/ogs/HSS_Tests.cfg 
b/ttcn3-hss-test-ogs/ogs/HSS_Tests.cfg
new file mode 100644
index 0000000..17fa1a5
--- /dev/null
+++ b/ttcn3-hss-test-ogs/ogs/HSS_Tests.cfg
@@ -0,0 +1,26 @@
+[ORDERED_INCLUDE]
+# Common configuration, shared between test suites
+"/osmo-ttcn3-hacks/Common.cfg"
+# testsuite specific configuration, not expected to change
+"/osmo-ttcn3-hacks/hss/HSS_Tests.default"
+
+# Local configuration below
+
+[LOGGING]
+
+[TESTPORT_PARAMETERS]
+
+[MODULE_PARAMETERS]
+mp_hss_hostname := "172.18.3.201";
+mp_hss_port := 3868;
+mp_diam_local_hostname := "172.18.3.202";
+mp_diam_local_port := 3868;
+mp_diam_orig_realm := "localdomain";
+mp_diam_orig_host := "mme.localdomain";
+mp_diam_dest_realm := "localdomain";
+mp_diam_dest_host := "hss.localdomain";
+
+[MAIN_CONTROLLER]
+
+[EXECUTE]
+HSS_Tests.control
diff --git a/ttcn3-hss-test-ogs/ogs/freediameter.conf 
b/ttcn3-hss-test-ogs/ogs/freediameter.conf
new file mode 100644
index 0000000..2678592
--- /dev/null
+++ b/ttcn3-hss-test-ogs/ogs/freediameter.conf
@@ -0,0 +1,265 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included 
file(s)
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "hss.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections 
(TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change 
in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+SecPort = 0;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA 
exchange is completed
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS 
protects also the
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections.
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "172.18.3.201";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file 
function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", 
"/etc/ssl/private/freeDiameter.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have 
been verified before.
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS 
format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function,
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected 
peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value 
must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the 
framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other 
peers.
+# app_*  : applications, these extensions usually register callbacks to handle 
specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter 
displays some
+# information about some events. This extension does not actually use a 
configuration file
+# but receives directly a parameter in the string passed to the extension. 
Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default 
hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with 
few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information 
about sent and received messages.
+# The four digits respectively control: connections, routing decisions, 
sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format 
spanning several lines.
+
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dbg_msg_dumps.fdx" : 
"0x8888";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_dcca.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this 
behavior (e.g., acl_wl).
+#
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not 
supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; 
Port=3868; } ;
+ConnectPeer = "mme.localdomain" { ConnectTo = "172.18.3.202"; Port = 3868; 
No_TLS; TcTimer = 2; };
+
+
+##############################################################
diff --git a/ttcn3-hss-test-ogs/ogs/mongod.conf 
b/ttcn3-hss-test-ogs/ogs/mongod.conf
new file mode 100644
index 0000000..65beb4e
--- /dev/null
+++ b/ttcn3-hss-test-ogs/ogs/mongod.conf
@@ -0,0 +1,44 @@
+# mongod.conf
+
+# for documentation of all options, see:
+#   http://docs.mongodb.org/manual/reference/configuration-options/
+
+# Where and how to store data.
+storage:
+  dbPath: /data/db
+  journal:
+    enabled: true
+#  engine:
+#  mmapv1:
+#  wiredTiger:
+
+# where to write logging data.
+systemLog:
+  destination: file
+  logAppend: true
+  path: /data/mongod.log
+
+# network interfaces
+net:
+  port: 27017
+  bindIp: 172.18.16.103
+
+
+# how the process runs
+processManagement:
+  timeZoneInfo: /usr/share/zoneinfo
+
+#security:
+
+#operationProfiling:
+
+#replication:
+
+#sharding:
+
+## Enterprise-Only Options:
+
+#auditLog:
+
+#snmp:
+
diff --git a/ttcn3-hss-test-ogs/ogs/open5gs-hss.yaml 
b/ttcn3-hss-test-ogs/ogs/open5gs-hss.yaml
new file mode 100644
index 0000000..5f38e58
--- /dev/null
+++ b/ttcn3-hss-test-ogs/ogs/open5gs-hss.yaml
@@ -0,0 +1,63 @@
+db_uri: mongodb://172.18.3.103/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    level: trace
+
+hss:
+    freeDiameter: /data/freediameter.conf
+
+#
+#  hss:
+#    sms_over_ims: "sip:smsc.mnc001.mcc001.3gppnetwork.org:7060;transport=tcp"
+#
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+#  o Use MongoDB Change Stream
+#  parameter:
+#    use_mongodb_change_stream: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:

--
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/34715?usp=email
To unsubscribe, or for help writing mail filters, visit 
https://gerrit.osmocom.org/settings

Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Iebeefd9689ae2efa54678b99ff929ca255ec64d1
Gerrit-Change-Number: 34715
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pes...@sysmocom.de>
Gerrit-MessageType: newchange

Reply via email to