HO: vty: clearly mark 'handover foo' as legacy alias for 'handover1 foo'
The ALIAS_DEPRECATED causes the legacy commands to no longer show up in the
command listing, hence making it more clear which commands are general and
which are for hodec1 only:
== BEFORE: ==
OsmoBSC(config-net)# list
...
handover (0|1|default)
handover algorithm (1|2|default)
handover1 window rxlev averaging (<1-10>|default)
...
handover2 window rxlev averaging (<1-10>|default)
...
handover2 retries (<0-9>|default)
handover window rxlev averaging (<1-10>|default) <-- legacy
handover window rxqual averaging (<1-10>|default)
handover window rxlev neighbor averaging (<1-10>|default)
handover power budget interval (<1-99>|default)
handover power budget hysteresis (<0-999>|default)
handover maximum distance (<0-9999>|default)
handover2 congestion-check (disabled|<1-999>|now)
OsmoBSC(config-net)# handover ?
0 Disable in-call handover
1 Enable in-call handover
default Enable/disable handover: Use default (0), remove explicit setting
on this node
algorithm Choose algorithm for handover decision
window Measurement averaging settings <-- legacy
power Neighbor cell power triggering
maximum Maximum Timing-Advance value (i.e. MS distance) before triggering
HO
OsmoBSC(config-net)# handover?
handover Handover general config <-- unchanged
== AFTER: ==
OsmoBSC(config-net)# list
...
handover (0|1|default)
handover algorithm (1|2|default)
handover1 window rxlev averaging (<1-10>|default)
...
handover2 window rxlev averaging (<1-10>|default)
...
handover2 retries (<0-9>|default)
handover2 congestion-check (disabled|<1-999>|now) <-- no more legacy
OsmoBSC(config-net)# handover ?
0 Disable in-call handover
1 Enable in-call handover
default Enable/disable handover: Use default (0), remove explicit setting
on this node
algorithm Choose algorithm for handover decision
<-- no more legacy
OsmoBSC(config-net)# handover?
handover Handover general config <-- unchanged
The "Legacy" doc string actually never shows on the VTY console, but it will
show in the reference manual.
(Even with ALIAS(), a 'handover?' would only show the "Handover general config"
doc string, so no loss there from using ALIAS_DEPRECATED().)
Change-Id: I86be674d82242f9ca73a4d0040015c1c79f2422d
---
M src/libbsc/handover_vty.c
M tests/handover_cfg.vty
2 files changed, 2 insertions(+), 3 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/01/6601/2
diff --git a/src/libbsc/handover_vty.c b/src/libbsc/handover_vty.c
index 0bd654c..51e448e 100644
--- a/src/libbsc/handover_vty.c
+++ b/src/libbsc/handover_vty.c
@@ -79,9 +79,9 @@
VTY_CMD_PREFIX, VTY_CMD, VTY_CMD_ARG, VTY_ARG_EVAL, \
VTY_WRITE_FMT, VTY_WRITE_CONV, \
VTY_DOC) \
-ALIAS(cfg_ho_##NAME, cfg_ho_##NAME##_cmd_alias, \
+ALIAS_DEPRECATED(cfg_ho_##NAME, cfg_ho_##NAME##_cmd_alias, \
"handover " VTY_CMD " (" VTY_CMD_ARG "|default)", \
- VTY_DOC \
+ "Legacy alias for 'handover1': " VTY_DOC \
"Use default (" #DEFAULT_VAL "), remove explicit setting on this
node\n");
HODEC1_CFG_ALL_MEMBERS
diff --git a/tests/handover_cfg.vty b/tests/handover_cfg.vty
index a9d3f52..3ad44d8 100644
--- a/tests/handover_cfg.vty
+++ b/tests/handover_cfg.vty
@@ -190,7 +190,6 @@
handover2 penalty-time failed-ho (<0-99999>|default)
handover2 penalty-time failed-assignment (<0-99999>|default)
handover2 retries (<0-9>|default)
-... !handover2
handover2 congestion-check (disabled|<1-999>|now)
...
--
To view, visit https://gerrit.osmocom.org/6601
To unsubscribe, visit https://gerrit.osmocom.org/settings
Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I86be674d82242f9ca73a4d0040015c1c79f2422d
Gerrit-PatchSet: 2
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Owner: Neels Hofmeyr <nhofm...@sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
