Kévin Redon has uploaded this change for review. ( https://gerrit.osmocom.org/9851
Change subject: SIMtrace: fix default SIM_RST pin state to allow phone controlled reset ...................................................................... SIMtrace: fix default SIM_RST pin state to allow phone controlled reset Change-Id: I1942ec6bd499cb2e14f6d7699a2b2d9b4197e654 --- M firmware/libboard/simtrace/include/board.h 1 file changed, 3 insertions(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/51/9851/1 diff --git a/firmware/libboard/simtrace/include/board.h b/firmware/libboard/simtrace/include/board.h index 691dbc3..c5f4dc4 100644 --- a/firmware/libboard/simtrace/include/board.h +++ b/firmware/libboard/simtrace/include/board.h @@ -66,8 +66,10 @@ #define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} /* Connect all lines (VPP, CLK, RST, and I/O) between card and phone */ #define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF +/* Card RST reset signal input (use as input since the phone will drive it) */ +#define PIN_SIM_RST_SNIFF {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} /* Pins used to sniff phone-card communication */ -#define PINS_SIM_SNIFF PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST +#define PINS_SIM_SNIFF PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF /* Disable power converter 4.5-6V to 3.3V (active high) */ #define PIN_SIM_PWEN_SNIFF {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} /* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */ -- To view, visit https://gerrit.osmocom.org/9851 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-MessageType: newchange Gerrit-Change-Id: I1942ec6bd499cb2e14f6d7699a2b2d9b4197e654 Gerrit-Change-Number: 9851 Gerrit-PatchSet: 1 Gerrit-Owner: Kévin Redon <kre...@sysmocom.de>