Kévin Redon has uploaded this change for review. (
https://gerrit.osmocom.org/10319
Change subject: remsim: fix USB hanging USB transfer
......................................................................
remsim: fix USB hanging USB transfer
After a couple of seconds of USB data exchange between remsim and
cardem, the USB transfer hangs.
On host side (remsim) I can see the USB BULK IN request.
On device side (cardem) I see that data has been submitted and
"sent" over USB, but on wireshark with USBmon I don't see the
corresponding USB BULK IN response.
When exiting remsim or just after powering of qmod (causing an
error in remsim) the USB BULK IN is show in wireshark. Thus it
must have been in a buffer, but not read by libusb_bulk_transfer.
By shortening the timeout a new libusb_bulk_transfer is made more
frequently, and the data gets read successfully.
T;his change also fixes the URB data display.
Change-Id: I1d124a41cc90893506933f6d76dc7331e52a74f9
---
M host/simtrace2-remsim.c
1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/19/10319/1
diff --git a/host/simtrace2-remsim.c b/host/simtrace2-remsim.c
index 52c5051..9a681b4 100644
--- a/host/simtrace2-remsim.c
+++ b/host/simtrace2-remsim.c
@@ -536,7 +536,7 @@
/* read data from SIMtrace2 device (local or via USB) */
if (transp->udp_fd < 0) {
rc = libusb_bulk_transfer(transp->usb_devh,
transp->usb_ep.in,
- buf, sizeof(buf), &xfer_len,
100000);
+ buf, sizeof(buf), &xfer_len,
100);
if (rc < 0 && rc != LIBUSB_ERROR_TIMEOUT &&
rc != LIBUSB_ERROR_INTERRUPTED &&
rc != LIBUSB_ERROR_IO) {
@@ -553,7 +553,7 @@
}
/* dispatch any incoming data */
if (xfer_len > 0) {
- printf("URB: %s\n", osmo_hexdump(buf, rc));
+ printf("URB: %s\n", osmo_hexdump(buf, xfer_len));
process_usb_msg(ci, buf, xfer_len);
msg_count++;
byte_count += xfer_len;
--
To view, visit https://gerrit.osmocom.org/10319
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I1d124a41cc90893506933f6d76dc7331e52a74f9
Gerrit-Change-Number: 10319
Gerrit-PatchSet: 1
Gerrit-Owner: Kévin Redon <kre...@sysmocom.de>
