Neels Hofmeyr has uploaded this change for review. (
https://gerrit.osmocom.org/11584
Change subject: ggsn: update vty reference
......................................................................
ggsn: update vty reference
Change-Id: I8a5c37505c0180d5c04c7792d6d0afdb0dffb282
---
M OsmoGGSN/vty/ggsn_vty_reference.xml
1 file changed, 118 insertions(+), 44 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals
refs/changes/84/11584/1
diff --git a/OsmoGGSN/vty/ggsn_vty_reference.xml
b/OsmoGGSN/vty/ggsn_vty_reference.xml
index 7a43263..7460026 100644
--- a/OsmoGGSN/vty/ggsn_vty_reference.xml
+++ b/OsmoGGSN/vty/ggsn_vty_reference.xml
@@ -85,12 +85,6 @@
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
- <command id='echo .MESSAGE'>
- <params>
- <param name='echo' doc='Echo a message back to the vty' />
- <param name='.MESSAGE' doc='The message to echo' />
- </params>
- </command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
@@ -175,7 +169,7 @@
<param name='1' doc='Prefix each log message with the log level name'
/>
</params>
</command>
- <command id='logging print file (0|1|basename)'>
+ <command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
@@ -183,6 +177,7 @@
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and
line' />
<param name='basename' doc='Prefix each log message with the source
file's basename (strip leading paths) and line' />
+ <param name='[last]' doc='Log source file info at the end of a log
line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
@@ -192,20 +187,10 @@
<param name='MASK' doc='List of logging categories to log, e.g.
'abc:mno:xyz'. Available log categories depend on the specific
application, refer to the 'logging level' command. Optionally add
individual log levels like 'abc,1:mno,3:xyz,5', where the level
numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging set log mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set' doc='Decide which categories to output.' />
- <param name='log' doc='Log commands' />
- <param name='mask' doc='Mask commands' />
- <param name='MASK' doc=''set log mask' is deprecated, please
refer to the docs of 'set-log-mask' instead' />
- </params>
- </command>
- <command id='logging level
(all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(everything|debug|info|notice|error|fatal)'>
+ <command id='logging level
(ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
<param name='ip' doc='IP Pool and other groups' />
<param name='tun' doc='Tunnel interface' />
<param name='ggsn' doc='GGSN' />
@@ -229,7 +214,6 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol'
/>
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log
anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels'
/>
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -237,6 +221,38 @@
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
+ <command id='logging level set-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='set-all' doc='Once-off set all categories to the given
log level. There is no single command to take back these changes -- each
category is set to the given level, period.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging level force-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Globally force all logging categories to
a specific level. This is released by the 'no logging level
force-all' command. Note: any 'logging level <category>
<level>' commands will have no visible effect after this, until the
forced level is released.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='no logging level force-all'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Release any globally forced log level set
with 'logging level force-all <level>'' />
+ </params>
+ </command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
@@ -310,6 +326,12 @@
<param name='counters' doc='Generate table of all registered counters'
/>
</params>
</command>
+ <command id='show rate-counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='rate-counters' doc='Show all rate counters' />
+ </params>
+ </command>
<command id='show pdp-context ggsn NAME [apn APN]'>
<params>
<param name='show' doc='Show running system information' />
@@ -389,12 +411,6 @@
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
- <command id='echo .MESSAGE'>
- <params>
- <param name='echo' doc='Echo a message back to the vty' />
- <param name='.MESSAGE' doc='The message to echo' />
- </params>
- </command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
@@ -492,7 +508,7 @@
<param name='1' doc='Prefix each log message with the log level name'
/>
</params>
</command>
- <command id='logging print file (0|1|basename)'>
+ <command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
@@ -500,6 +516,7 @@
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and
line' />
<param name='basename' doc='Prefix each log message with the source
file's basename (strip leading paths) and line' />
+ <param name='[last]' doc='Log source file info at the end of a log
line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
@@ -509,20 +526,10 @@
<param name='MASK' doc='List of logging categories to log, e.g.
'abc:mno:xyz'. Available log categories depend on the specific
application, refer to the 'logging level' command. Optionally add
individual log levels like 'abc,1:mno,3:xyz,5', where the level
numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging set log mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set' doc='Decide which categories to output.' />
- <param name='log' doc='Log commands' />
- <param name='mask' doc='Mask commands' />
- <param name='MASK' doc=''set log mask' is deprecated, please
refer to the docs of 'set-log-mask' instead' />
- </params>
- </command>
- <command id='logging level
(all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(everything|debug|info|notice|error|fatal)'>
+ <command id='logging level
(ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
<param name='ip' doc='IP Pool and other groups' />
<param name='tun' doc='Tunnel interface' />
<param name='ggsn' doc='GGSN' />
@@ -546,7 +553,6 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol'
/>
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log
anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels'
/>
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -554,6 +560,38 @@
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
+ <command id='logging level set-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='set-all' doc='Once-off set all categories to the given
log level. There is no single command to take back these changes -- each
category is set to the given level, period.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging level force-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Globally force all logging categories to
a specific level. This is released by the 'no logging level
force-all' command. Note: any 'logging level <category>
<level>' commands will have no visible effect after this, until the
forced level is released.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='no logging level force-all'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Release any globally forced log level set
with 'logging level force-all <level>'' />
+ </params>
+ </command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
@@ -627,6 +665,12 @@
<param name='counters' doc='Generate table of all registered counters'
/>
</params>
</command>
+ <command id='show rate-counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='rate-counters' doc='Show all rate counters' />
+ </params>
+ </command>
<command id='show pdp-context ggsn NAME [apn APN]'>
<params>
<param name='show' doc='Show running system information' />
@@ -777,8 +821,7 @@
<command id='no log stderr'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
+ <param name='log' doc='Configure logging sub-system' /> <param
name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='log file .FILENAME'>
@@ -966,7 +1009,7 @@
<param name='1' doc='Prefix each log message with the log level name'
/>
</params>
</command>
- <command id='logging print file (0|1|basename)'>
+ <command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
@@ -974,13 +1017,13 @@
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and
line' />
<param name='basename' doc='Prefix each log message with the source
file's basename (strip leading paths) and line' />
+ <param name='[last]' doc='Log source file info at the end of a log
line. If omitted, log source file info just before the log text.' />
</params>
</command>
- <command id='logging level
(all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(everything|debug|info|notice|error|fatal)'>
+ <command id='logging level
(ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
<param name='ip' doc='IP Pool and other groups' />
<param name='tun' doc='Tunnel interface' />
<param name='ggsn' doc='GGSN' />
@@ -1004,7 +1047,6 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol'
/>
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log
anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels'
/>
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -1012,6 +1054,38 @@
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
+ <command id='logging level set-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='set-all' doc='Once-off set all categories to the given
log level. There is no single command to take back these changes -- each
category is set to the given level, period.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging level force-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Globally force all logging categories to
a specific level. This is released by the 'no logging level
force-all' command. Note: any 'logging level <category>
<level>' commands will have no visible effect after this, until the
forced level is released.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='no logging level force-all'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Release any globally forced log level set
with 'logging level force-all <level>'' />
+ </params>
+ </command>
</node>
<node id='config-stats'>
<name>config-stats</name>
--
To view, visit https://gerrit.osmocom.org/11584
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I8a5c37505c0180d5c04c7792d6d0afdb0dffb282
Gerrit-Change-Number: 11584
Gerrit-PatchSet: 1
Gerrit-Owner: Neels Hofmeyr <nhofm...@sysmocom.de>
