laforge has submitted this change and it was merged. ( https://gerrit.osmocom.org/c/osmo-trx/+/14382 )
Change subject: doc: vty: Update trx_vty_reference.xml ...................................................................... doc: vty: Update trx_vty_reference.xml Change-Id: I2587cd47ee48e979de447f7a0f4d79bb5fac0592 --- M doc/manuals/vty/trx_vty_reference.xml 1 file changed, 138 insertions(+), 43 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/doc/manuals/vty/trx_vty_reference.xml b/doc/manuals/vty/trx_vty_reference.xml index ffc642a..d6cd15d 100644 --- a/doc/manuals/vty/trx_vty_reference.xml +++ b/doc/manuals/vty/trx_vty_reference.xml @@ -85,12 +85,6 @@ <param name='length' doc='Set number of lines on a screen' /> </params> </command> - <command id='echo .MESSAGE'> - <params> - <param name='echo' doc='Echo a message back to the vty' /> - <param name='.MESSAGE' doc='The message to echo' /> - </params> - </command> <command id='who'> <params> <param name='who' doc='Display who is on vty' /> @@ -181,7 +175,7 @@ <param name='1' doc='Prefix each log message with the log level name' /> </params> </command> - <command id='logging print file (0|1|basename)'> + <command id='logging print file (0|1|basename) [last]'> <params> <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> @@ -189,6 +183,7 @@ <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with the source file and line' /> <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> + <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> </params> </command> <command id='logging set-log-mask MASK'> @@ -198,21 +193,14 @@ <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> </params> </command> - <command id='logging set log mask MASK'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='set' doc='Decide which categories to output.' /> - <param name='log' doc='Log commands' /> - <param name='mask' doc='Mask commands' /> - <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /> - </params> - </command> - <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'> + <command id='logging level (main|trxctrl|dev|lms|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> <params> <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> - <param name='all' doc='Global setting for all subsystems' /> <param name='main' doc='Main generic category' /> + <param name='trxctrl' doc='TRX CTRL interface' /> + <param name='dev' doc='Device/Driver specific code' /> + <param name='lms' doc='Logging from within LimeSuite itself' /> <param name='lglobal' doc='Library-internal global log family' /> <param name='llapd' doc='LAPD in libosmogsm' /> <param name='linp' doc='A-bis Intput Subsystem' /> @@ -231,7 +219,7 @@ <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='lrspro' doc='Remote SIM protocol' /> <param name='debug' doc='Log debug messages and higher levels' /> <param name='info' doc='Log informational messages and higher levels' /> <param name='notice' doc='Log noticeable messages and higher levels' /> @@ -239,6 +227,38 @@ <param name='fatal' doc='Log only fatal messages' /> </params> </command> + <command id='logging level set-all (debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='logging level force-all (debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='no logging level force-all'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> + </params> + </command> <command id='show logging vty'> <params> <param name='show' doc='Show running system information' /> @@ -312,6 +332,12 @@ <param name='counters' doc='Generate table of all registered counters' /> </params> </command> + <command id='show rate-counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='rate-counters' doc='Show all rate counters' /> + </params> + </command> </node> <node id='enable'> <name>enable</name> @@ -365,12 +391,6 @@ <param name='length' doc='Set number of lines on a screen' /> </params> </command> - <command id='echo .MESSAGE'> - <params> - <param name='echo' doc='Echo a message back to the vty' /> - <param name='.MESSAGE' doc='The message to echo' /> - </params> - </command> <command id='who'> <params> <param name='who' doc='Display who is on vty' /> @@ -474,7 +494,7 @@ <param name='1' doc='Prefix each log message with the log level name' /> </params> </command> - <command id='logging print file (0|1|basename)'> + <command id='logging print file (0|1|basename) [last]'> <params> <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> @@ -482,6 +502,7 @@ <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with the source file and line' /> <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> + <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> </params> </command> <command id='logging set-log-mask MASK'> @@ -491,21 +512,14 @@ <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> </params> </command> - <command id='logging set log mask MASK'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='set' doc='Decide which categories to output.' /> - <param name='log' doc='Log commands' /> - <param name='mask' doc='Mask commands' /> - <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /> - </params> - </command> - <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'> + <command id='logging level (main|trxctrl|dev|lms|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> <params> <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> - <param name='all' doc='Global setting for all subsystems' /> <param name='main' doc='Main generic category' /> + <param name='trxctrl' doc='TRX CTRL interface' /> + <param name='dev' doc='Device/Driver specific code' /> + <param name='lms' doc='Logging from within LimeSuite itself' /> <param name='lglobal' doc='Library-internal global log family' /> <param name='llapd' doc='LAPD in libosmogsm' /> <param name='linp' doc='A-bis Intput Subsystem' /> @@ -524,7 +538,7 @@ <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='lrspro' doc='Remote SIM protocol' /> <param name='debug' doc='Log debug messages and higher levels' /> <param name='info' doc='Log informational messages and higher levels' /> <param name='notice' doc='Log noticeable messages and higher levels' /> @@ -532,6 +546,38 @@ <param name='fatal' doc='Log only fatal messages' /> </params> </command> + <command id='logging level set-all (debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='logging level force-all (debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='no logging level force-all'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> + </params> + </command> <command id='show logging vty'> <params> <param name='show' doc='Show running system information' /> @@ -605,6 +651,12 @@ <param name='counters' doc='Generate table of all registered counters' /> </params> </command> + <command id='show rate-counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='rate-counters' doc='Show all rate counters' /> + </params> + </command> </node> <node id='config'> <name>config</name> @@ -910,7 +962,7 @@ <param name='1' doc='Prefix each log message with the log level name' /> </params> </command> - <command id='logging print file (0|1|basename)'> + <command id='logging print file (0|1|basename) [last]'> <params> <param name='logging' doc='Configure logging' /> <param name='print' doc='Log output settings' /> @@ -918,14 +970,17 @@ <param name='0' doc='Don't prefix each log message' /> <param name='1' doc='Prefix each log message with the source file and line' /> <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> + <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> </params> </command> - <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'> + <command id='logging level (main|trxctrl|dev|lms|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> <params> <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> - <param name='all' doc='Global setting for all subsystems' /> <param name='main' doc='Main generic category' /> + <param name='trxctrl' doc='TRX CTRL interface' /> + <param name='dev' doc='Device/Driver specific code' /> + <param name='lms' doc='Logging from within LimeSuite itself' /> <param name='lglobal' doc='Library-internal global log family' /> <param name='llapd' doc='LAPD in libosmogsm' /> <param name='linp' doc='A-bis Intput Subsystem' /> @@ -944,7 +999,7 @@ <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='lrspro' doc='Remote SIM protocol' /> <param name='debug' doc='Log debug messages and higher levels' /> <param name='info' doc='Log informational messages and higher levels' /> <param name='notice' doc='Log noticeable messages and higher levels' /> @@ -952,6 +1007,38 @@ <param name='fatal' doc='Log only fatal messages' /> </params> </command> + <command id='logging level set-all (debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='logging level force-all (debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='no logging level force-all'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> + </params> + </command> </node> <node id='config-stats'> <name>config-stats</name> @@ -1035,10 +1122,11 @@ <param name='login' doc='Enable password checking' /> </params> </command> - <command id='bind A.B.C.D'> + <command id='bind A.B.C.D [<0-65535>]'> <params> <param name='bind' doc='Accept VTY telnet connections on local interface' /> <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> + <param name='[<0-65535>]' doc='Local TCP port number' /> </params> </command> </node> @@ -1146,6 +1234,13 @@ <param name='enable' doc='(null)' /> </params> </command> + <command id='ext-rach (disable|enable)'> + <params> + <param name='ext-rach' doc='Enable extended (11-bit) RACH (default=disable)' /> + <param name='disable' doc='(null)' /> + <param name='enable' doc='(null)' /> + </params> + </command> <command id='rt-prio <1-32>'> <params> <param name='rt-prio' doc='Set the SCHED_RR real-time priority' /> -- To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/14382 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-trx Gerrit-Branch: master Gerrit-Change-Id: I2587cd47ee48e979de447f7a0f4d79bb5fac0592 Gerrit-Change-Number: 14382 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pes...@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <lafo...@gnumonks.org> Gerrit-MessageType: merged