pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-trx/+/14985
Change subject: Drop old README information, provide new updated README ...................................................................... Drop old README information, provide new updated README Previous content in README file is actually a description of the TRXD and TRXC protocols, and it has already been moved to the User Manual some time ago. INSTALLATION contained README related information, but it was really out of date. So this commit basically drops those two files and provides a new README with content taken from Osmocom's OsmoTRX project wiki page. Change-Id: I3df00799ce80aa4af43225e69a408ba2cbc444db --- D INSTALLATION M Makefile.am M README 3 files changed, 18 insertions(+), 132 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-trx refs/changes/85/14985/1 diff --git a/INSTALLATION b/INSTALLATION deleted file mode 100644 index f87b6cc..0000000 --- a/INSTALLATION +++ /dev/null @@ -1,19 +0,0 @@ -Installation Requirements - - - -osmo-trx compiles to a simple Unix binary and does not require special -installation. - -One some systems (Ubuntu), you will need to define LIBS = -lpthread prior to -running configure. - -To run osmo-trx, the following should be installed: - libuhd (https://gnuradio.org). - This is part of the GNURadio installation. - -For information on specific executables, see tests/README.tests and -apps/README.apps. - -See https://osmocom.org/projects/osmotrx/wiki/OsmoTRX for more -information. diff --git a/Makefile.am b/Makefile.am index 3e87200..ccc39a2 100644 --- a/Makefile.am +++ b/Makefile.am @@ -36,7 +36,6 @@ tests EXTRA_DIST = \ - INSTALLATION \ LEGAL \ COPYING \ README diff --git a/README b/README index 502d661..7747fc8 100644 --- a/README +++ b/README @@ -1,116 +1,22 @@ -This is the interface to the transcevier. +About OsmTRX +============= -Each TRX Manager UDP socket interface represents a single ARFCN. -Each of these per-ARFCN interfaces is a pair of UDP sockets, one for control and one for data. -Give a base port B (5700), the master clock interface is at port P=B. -The TRX-side control interface for C(N) is on port P=B+2N+1 and the data interface is on an odd numbered port P=B+2N+2. -The corresponding core-side interface for every socket is at P+100. -For any given build, the number of ARFCN interfaces can be fixed. +OsmoTRX is a software-defined radio transceiver that implements the Layer 1 +physical layer of a BTS comprising the following 3GPP specifications: +* TS 05.01 "Physical layer on the radio path" +* TS 05.02 "Multiplexing and Multiple Access on the Radio Path" +* TS 05.04 "Modulation" +* TS 05.10 "Radio subsystem synchronization" +OsmoTRX is based on the transceiver code from the OpenBTS project, but setup to +operate independently with the purpose of using with non-OpenBTS software and +projects, while still maintaining backwards compatibility with OpenBTS when +possible. Currently there are numerous features contained in OsmoTRX that extend +the functionality of the OpenBTS transceiver. These features include enhanced +support for various embedded platforms - notably ARM - and dual channel +diversity support for the Fairwaves umtrx. -Indications on the Master Clock Interface - -The master clock interface is output only (from the radio). -Messages are "indications". - -CLOCK gives the current value of the transceiver clock to be used by the core. -This message is sent whenever a trasmission packet arrives that is too late or too early. The clock value is NOT the current transceiver time. It is a time setting the the core should use to give better packet arrival times. -IND CLOCK <totalFrames> - - - -Commands on the Per-ARFCN Control Interface - -The per-ARFCN control interface uses a command-reponse protocol. -Commands are NULL-terminated ASCII strings, one per UDP socket. -Each command has a corresponding response. -Every command is of the form: - -CMD <cmdtype> [params] - -The <cmdtype> is the actual command. -Parameters are optional depending on the commands type. -Every response is of the form: - -RSP <cmdtype> <status> [result] - -The <status> is 0 for success and a non-zero error code for failure. -Successful responses may include results, depending on the command type. - - -Power Control - -POWEROFF shuts off transmitter power and stops the demodulator. -CMD POWEROFF -RSP POWEROFF <status> - -POWERON starts the transmitter and starts the demodulator. Initial power level is very low. -This command fails if the transmitter and receiver are not yet tuned. -This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng. -If the transceiver is already on, it response with success to this command. -CMD POWERON -RSP POWERON <status> - -SETPOWER sets output power in dB wrt full scale. -This command fails if the transmitter and receiver are not running. -CMD SETPOWER <dB> -RSP SETPOWER <status> <dB> - -ADJPOWER adjusts power by the given dB step. Response returns resulting power level wrt full scale. -This command fails if the transmitter and receiver are not running. -CMD ADJPOWER <dBStep> -RSP ADJPOWER <status> <dBLevel> - - -Tuning Control - -RXTUNE tunes the receiver to a given frequency in kHz. -This command fails if the receiver is already running. -(To re-tune you stop the radio, re-tune, and restart.) -This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng. -CMD RXTUNE <kHz> -RSP RXTUNE <status> <kHz> - -TXTUNE tunes the transmitter to a given frequency in kHz. -This command fails if the transmitter is already running. -(To re-tune you stop the radio, re-tune, and restart.) -This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng. -CMD TXTUNE <kHz> -RSP TXTUNE <status> <kHz> - - -Timeslot Control - -SETSLOT sets the format of the uplink timeslots in the ARFCN. -The <timeslot> indicates the timeslot of interest. -The <chantype> indicates the type of channel that occupies the timeslot. -A chantype of zero indicates the timeslot is off. -CMD SETSLOT <timeslot> <chantype> -RSP SETSLOT <status> <timeslot> <chantype> - - -Messages on the per-ARFCN Data Interface - -Messages on the data interface carry one radio burst per UDP message. - - -Received Data Burst - -1 byte timeslot index -4 bytes GSM frame number, big endian -1 byte RSSI in -dBm -2 bytes correlator timing offset in 1/256 symbol steps, 2's-comp, big endian -148 bytes soft symbol estimates, 0 -> definite "0", 255 -> definite "1" - - -Transmit Data Burst - -1 byte timeslot index -4 bytes GSM frame number, big endian -1 byte transmit level wrt ARFCN max, -dB (attenuation) -148 bytes output symbol values, 0 & 1 - - - - +Find OsmoTRX issue tracker and wiki online at +https://osmocom.org/projects/osmotrx +https://osmocom.org/projects/osmotrx/wiki/OsmoTRX -- To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/14985 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-trx Gerrit-Branch: master Gerrit-Change-Id: I3df00799ce80aa4af43225e69a408ba2cbc444db Gerrit-Change-Number: 14985 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pes...@sysmocom.de> Gerrit-MessageType: newchange
