pespin has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/15282
Change subject: ggsn: Introduce test TC_pdp_act_restart_ctr_echo
......................................................................
ggsn: Introduce test TC_pdp_act_restart_ctr_echo
VTY functionalities to enable and disable echo requests in osmo-ggsn are
added too as part of the test.
Depends: osmo-ggsn.git Id2c84165dc59dff495106758146a701ca488834f
Related: OS#4165
Change-Id: Ia37e48e7ff9ad063f9eabf447f8a6a0a3fc380d9
---
M ggsn_tests/GGSN_Tests.ttcn
M ggsn_tests/expected-results.xml
2 files changed, 86 insertions(+), 5 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks
refs/changes/82/15282/1
diff --git a/ggsn_tests/GGSN_Tests.ttcn b/ggsn_tests/GGSN_Tests.ttcn
index ae92626..e294fb7 100644
--- a/ggsn_tests/GGSN_Tests.ttcn
+++ b/ggsn_tests/GGSN_Tests.ttcn
@@ -64,6 +64,13 @@
* The tests expect to be able to send ping packets between any
two simulated MS within the same
* address range. This requires IP forwarding to be enabled on
the corresponding tun interfaces.
*/
+
+ /*
+ * Whether ggsn supports "(no) echo-interval" VTY command
+ * (osmo-ggsn.git Id2c84165dc59dff495106758146a701ca488834f).
+ * This option can be dropped after osmo-ggsn release > 1.4.0
exists.
+ */
+ boolean m_ggsn_supports_echo_interval := true;
}
type set PdpContext {
@@ -107,6 +114,7 @@
port TELNETasp_PT GGSNVTY;
var boolean use_gtpu_txseq := false;
+ var boolean g_use_echo := false;
}
private function f_init_vty() runs on GT_CT {
@@ -159,6 +167,17 @@
return true;
}
+ private function f_vty_enable_echo_interval(boolean enable) runs on
GT_CT {
+ f_vty_enter_config(GGSNVTY);
+ f_vty_transceive(GGSNVTY, "ggsn ggsn0");
+ if (enable) {
+ f_vty_transceive(GGSNVTY, "echo-interval 5");
+ } else {
+ f_vty_transceive(GGSNVTY, "no echo-interval");
+ }
+ f_vty_transceive(GGSNVTY, "end");
+ }
+
function f_init() runs on GT_CT {
if (g_initialized == true) {
return;
@@ -184,20 +203,22 @@
f_init_vty();
f_vty_set_gpdu_txseq(use_gtpu_txseq);
+ if (m_ggsn_supports_echo_interval) {
+ f_vty_enable_echo_interval(g_use_echo);
+ }
}
/* Altstep implementing responses to any incoming echo requests */
altstep pingpong() runs on GT_CT {
var Gtp1cUnitdata ud;
var Gtp1uUnitdata udu;
- [] GTPC.receive(tr_GTPC_PING(?)) -> value ud {
+ [g_use_echo] GTPC.receive(tr_GTPC_PING(?)) -> value ud {
var uint16_t seq :=
oct2int(ud.gtpc.opt_part.sequenceNumber);
- GTPC.send(ts_GTPC_PONG(ud.peer, seq, '00'O));
+ GTPC.send(ts_GTPC_PONG(ud.peer, seq, g_restart_ctr));
repeat;
};
- [] GTPU.receive(tr_GTPU_PING(?)) -> value udu {
- var uint16_t seq :=
oct2int(udu.gtpu.opt_part.sequenceNumber);
- GTPU.send(ts_GTPU_PONG(udu.peer, seq, '00'O));
+ [not g_use_echo] GTPC.receive(tr_GTPC_PING(?)) {
+ setverdict(fail, "GTP Echo Req rceived but not enabled
in VTY");
};
[] T_default.timeout { setverdict(fail); };
}
@@ -307,6 +328,35 @@
T_default.stop;
}
+ function f_pdp_ctx_exp_del_req(PdpContext ctx, template (omit) OCT1
expect_cause := omit, boolean expect_teardown := false) runs on GT_CT {
+ var Gtp1cUnitdata ud;
+ var default d;
+
+ T_default.start;
+ d := activate(pingpong());
+ alt {
+ [] GTPC.receive(tr_GTPC_MsgType(g_peer_c,
deletePDPContextRequest, ctx.teic)) -> value ud {
+ if (istemplatekind(expect_cause, "omit") and
not ispresent(ud.gtpc.gtpc_pdu.deletePDPContextRequest.cause.causevalue)) {
+ setverdict(pass);
+ } else if (not istemplatekind(expect_cause,
"omit") and
+
ispresent(ud.gtpc.gtpc_pdu.deletePDPContextRequest.cause.causevalue) and
+
ud.gtpc.gtpc_pdu.deletePDPContextRequest.cause.causevalue ==
valueof(expect_cause)) {
+ setverdict(pass);
+ } else {
+ setverdict(fail);
+ }
+
+ if (expect_teardown ==
ispresent(ud.gtpc.gtpc_pdu.deletePDPContextRequest.tearDownIndicator)) {
+ setverdict(pass);
+ } else {
+ setverdict(fail);
+ }
+ }
+ }
+ deactivate(d);
+ T_default.stop;
+ }
+
function f_pdp_ctx_del(PdpContext ctx, template BIT1 teardown_ind, OCT1
expect_causevalue := '80'O) runs on GT_CT {
var Gtp1cUnitdata ud;
var default d;
@@ -1330,6 +1380,32 @@
f_pdp_ctx_del(ctx, '1'B, cause_nonexistent);
}
+ /* Activate PDP context + trigger Recovery procedure through EchoResp */
+ testcase TC_pdp_act_restart_ctr_echo() runs on GT_CT {
+ var Gtp1cUnitdata ud;
+ g_use_echo := true;
+ f_init();
+ var PdpContext ctx := valueof(t_DefinePDP(f_rnd_imsi('26242'H),
'1234'O, c_ApnInternet, valueof(t_EuaIPv4Dyn)));
+ f_pdp_ctx_act(ctx);
+
+ /* Wait to receive echo request and send initial Restart
counter */
+ GTPC.receive(tr_GTPC_PING(?)) -> value ud {
+ var uint16_t seq :=
oct2int(ud.gtpc.opt_part.sequenceNumber);
+ GTPC.send(ts_GTPC_PONG(ud.peer, seq, g_restart_ctr));
+ };
+
+ /* Wait to receive second echo request and send incremented
Restart
+ counter. This will fake a restarted SGSN, and pdp ctx
allocated
+ should be released by GGSN */
+ g_restart_ctr := int2oct(oct2int(g_restart_ctr) + 1, 1);
+ GTPC.receive(tr_GTPC_PING(?)) -> value ud {
+ var uint16_t seq :=
oct2int(ud.gtpc.opt_part.sequenceNumber);
+ GTPC.send(ts_GTPC_PONG(ud.peer, seq, g_restart_ctr));
+ };
+ f_pdp_ctx_exp_del_req(ctx, omit, true);
+ setverdict(pass);
+ }
+
control {
execute(TC_pdp4_act_deact());
execute(TC_pdp4_act_deact_ipcp());
@@ -1358,5 +1434,9 @@
execute(TC_echo_req_resp());
execute(TC_act_deact_retrans_duplicate());
+
+ if (m_ggsn_supports_echo_interval) {
+ execute(TC_pdp_act_restart_ctr_echo());
+ }
}
}
diff --git a/ggsn_tests/expected-results.xml b/ggsn_tests/expected-results.xml
index 374cde0..c31c14a 100644
--- a/ggsn_tests/expected-results.xml
+++ b/ggsn_tests/expected-results.xml
@@ -24,4 +24,5 @@
<testcase classname='GGSN_Tests' name='TC_pdp46_act_deact_apn4'
time='MASKED'/>
<testcase classname='GGSN_Tests' name='TC_echo_req_resp' time='MASKED'/>
<testcase classname='GGSN_Tests' name='TC_act_deact_retrans_duplicate'
time='MASKED'/>
+ <testcase classname='GGSN_Tests' name='TC_pdp_act_restart_ctr_echo'
time='MASKED'/>
</testsuite>
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/15282
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: Ia37e48e7ff9ad063f9eabf447f8a6a0a3fc380d9
Gerrit-Change-Number: 15282
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pes...@sysmocom.de>
Gerrit-MessageType: newchange
