fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bts/+/21450 )
Change subject: vty: fix dump_lchan_trx_ts(): dump dedicated channels only ...................................................................... vty: fix dump_lchan_trx_ts(): dump dedicated channels only It does not make sense to dump CCCH/CBCH as dedicated channels: OsmoBTS# show lchan BTS 0, TRX 0, Timeslot 0, Lchan 4: Type CCCH State: ACTIVE BS (Downlink) Power Control (autonomous): Channel reduction: 0 dB (max 0 dB) TRX reduction: 0 dB Actual / Nominal power: 13 dBm / 13 dBm MS (Uplink) Power Control (autonomous): Current power level: 0, -39 dBm (max 0, -39 dBm) Channel Mode / Codec: SIGNALLING LAPDm SAPIs: DCCH --, SACCH -- Valid System Information: 0x00000060 MS Timing Offset: 0, propagation delay: 0 symbols Radio Link Failure Counter 'S': 0 so let's only dump SDCCH, TCH/F, and TCH/H. Change-Id: Id7880de56a93cc9fa4ca576b094cef35ee269822 --- M src/common/vty.c 1 file changed, 8 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/50/21450/1 diff --git a/src/common/vty.c b/src/common/vty.c index 7baddef..8837079 100644 --- a/src/common/vty.c +++ b/src/common/vty.c @@ -1405,9 +1405,15 @@ int lchan_nr; for (lchan_nr = 0; lchan_nr < TS_MAX_LCHAN; lchan_nr++) { const struct gsm_lchan *lchan = &ts->lchan[lchan_nr]; - if (lchan->state == LCHAN_S_NONE) + switch (lchan->state) { + case GSM_LCHAN_SDCCH: + case GSM_LCHAN_TCH_F: + case GSM_LCHAN_TCH_H: + dump_cb(vty, lchan); + break; + default: continue; - dump_cb(vty, lchan); + } } return CMD_SUCCESS; -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/21450 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Id7880de56a93cc9fa4ca576b094cef35ee269822 Gerrit-Change-Number: 21450 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanits...@sysmocom.de> Gerrit-MessageType: newchange