>Hello, >I have an Aiptek6000U tablet, for which I finally got the kernel driver >working. "evtest" reports what seems to be correct.
>Event: time 1329324589.249332, -------------- Report Sync ------------ >Event: time 1329324589.265320, type 3 (Absolute), code 0 (X), value 155 >Event: time 1329324589.265326, type 3 (Absolute), code 1 (Y), value 19 >Event: time 1329324589.265328, type 3 (Absolute), code 24 (Pressure), >value 511 >Event: time 1329324589.265332, type 1 (Key), code 331 (Stylus), value 1 >Event: time 1329324589.265334, -------------- Report Sync ------------ >Event: time 1329324589.313317, type 3 (Absolute), code 0 (X), value 154 >Event: time 1329324589.313325, type 3 (Absolute), code 1 (Y), value 22 >Event: time 1329324589.313328, -------------- Report Sync ------------ >Event: time 1329324589.321342, type 3 (Absolute), code 1 (Y), value 23 >Event: time 1329324589.321352, -------------- Report Sync ------------ >Event: time 1329324589.345308, type 3 (Absolute), code 1 (Y), value 24 >Event: time 1329324589.345317, -------------- Report Sync ------------ >Event: time 1329324589.465290, type 3 (Absolute), code 24 (Pressure), >value 240 >Event: time 1329324589.465300, -------------- Report Sync ------------ >Event: time 1329324589.473289, type 3 (Absolute), code 24 (Pressure), >value 233 >Event: time 1329324589.473297, -------------- Report Sync ------------ >Event: time 1329324589.481287, type 3 (Absolute), code 24 (Pressure), >value 222 >Event: time 1329324589.481296, type 1 (Key), code 331 (Stylus), value 0 >Event: time 1329324589.481299, type 3 (Absolute), code 40 (Misc), value 33 >Event: time 1329324589.481301, -------------- Report Sync ------------ >X11 is configured as follows: >Section "InputClass" > Identifier "pen" > MatchProduct "Aiptek|AIPTEK|aiptek" > MatchDevicePath "/dev/input/event*" > Driver "aiptek" > Option "USB" "on" > Option "Type" "stylus" > Option "Mode" "absolute" > Option "zMin" "0" > Option "zMax" "511" >EndSection >However, I had a hard time to get GIMP to do what I want. I configured >the tablet through Edit->Preferences->Input Devices->Configure Extended >Input devices->Device: Aiptek, Mode: Screen, Axes: X-1, Y-2, Pressure-3. >Xtilt-none, Ytilt-none. Moving the Stylus cursor and pressure works. Now >to the big BUT: >To have the stylus drawing I have to press the lower button on it. This >works *sometimes*. And there is no way to stop drawing again. Plus, >switching tools is not possible, GIMP doesn't react to the keyboard >while the stylus is in use. >What I'm doing wrong? How is it supposed to work? >Kind regards > Jan -- gerard82 (via gimpusers.com) If you use KDE as a desktop you might wanna try kde-misc/wacomtablet. Despite it's name it supports quite a few graphic tablets and some Aiptek models among them. Gerard. _______________________________________________ gimp-user-list mailing list gimp-user-list@gnome.org http://mail.gnome.org/mailman/listinfo/gimp-user-list