On 08/24, Ivan Vyshnevskyi wrote:
> On 23/08/17 18:58, Jeff King wrote:
> > On Wed, Aug 23, 2017 at 12:49:29PM +0300, Ivan Vyshnevskyi wrote:
> >
> >> Commits 47abd85 (fetch: Strip usernames from url's before storing them,
> >> 2009-04-17) and later 882d49c (push: anonymize URL in status output,
> >> 2016-07-14) made fetch and push strip the authentication part of the
> >> remote URLs when used in the merge-commit messages or status outputs.
> >> The URLs that are part of the error messages were not anonymized.
> >>
> >> A commonly used pattern for storing artifacts from a build server in a
> >> remote repository utilizes a "secure" environment variable with
> >> credentials to embed them in the URL and execute a push. Given enough
> >> runs, an intermittent network failure will cause a push to fail, leaving
> >> a non-anonymized URL in the build log.
> >>
> >> To prevent that, reuse the same anonymizing function to scrub
> >> credentials from URL in the push error output.
> >
> > This makes sense. I suspect that most errors we output should be using
> > the anonymized URL. Did you poke around for other calls?
> Yes, I tried to check and unfortunately there are couple of places with
> possible leaks:
> * 'discover_refs()' in remote-curl.c when there's a HTTP error (see a
> real-life scenario with an authz error in my response to Lars) -- is it
> ok to include transport.h just to use one function or is there a cleaner
> way?
> * 'setup_push_upstream()' in push.c when a command doesn't have a branch
> names (haven't saw problems with this in the wild, but could occur
> during the CI setup) -- for this one, probably anonymization should
> happen when the 'remote->name' field is set in the 'make_remote()'; same
> question though, is it ok to include transport.h here?
>
> Also there's an case of verbose output: I'm not sure I should change it,
> but it does print out the non-anonymized URLs at least during push.
> >
> > The general structure of the patch looks good, but I have a few minor
> > comments below.
> >
> >> Not sure how much of the background should be included in the commit
> >> message.
> >> The "commonly used pattern" I mention could be found in the myriad of
> >> online tutorials and looks something like this:
> >
> > My knee-jerk reaction is if it's worth writing after the dashes, it's
> > worth putting in the commit message.
> >
> > However, in the case I think it is OK as-is (the motivation of "we
> > already avoid leaking auth info to stdout, so we should do the same for
> > error messages" seems self-contained and reasonable)
> Well, I tend to be wordy, and most of the commit messages I saw were
> rather short, so decided to split. Wonder, if maybe example command
> should be included without the rest of it. Would it be useful?
I'm guilty of writing short commit messages (something I need to work
on) but when looking through logs I much prefer to see longer messages
explaining rationals and trade-offs.
> >
> >> diff --git a/builtin/push.c b/builtin/push.c
> >> index 03846e837..59f3bc975 100644
> >> --- a/builtin/push.c
> >> +++ b/builtin/push.c
> >> @@ -336,7 +336,7 @@ static int push_with_options(struct transport
> >> *transport, int flags)
> >> err = transport_push(transport, refspec_nr, refspec, flags,
> >> &reject_reasons);
> >> if (err != 0)
> >> - error(_("failed to push some refs to '%s'"), transport->url);
> >> + error(_("failed to push some refs to '%s'"),
> >> transport_anonymize_url(transport->url));
> >
> > This leaks the return value. That's probably not a _huge_ deal since the
> > program is likely to exit, but it's a bad pattern. I wonder if we should
> > be setting up transport->anonymous_url preemptively, and just let its
> > memory belong to the transport struct.
> Ah. Thanks! I knew I'd fail in the memory management even with the
> one-line patch. :)
>
> About 'transport->anonymous_url': not sure if it's worth it. There are
> four calls to 'transport_anonymize_url' right now and it looks like the
> new one in my patch is the first that has a transport struct instance
> near by. The next likely candidate for update 'discover_refs()' also
> gets the url as an argument.
> >
> >> diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh
> >> index d38bf3247..0b6fb6252 100755
> >> --- a/t/t5541-http-push-smart.sh
> >> +++ b/t/t5541-http-push-smart.sh
> >> @@ -377,5 +377,23 @@ test_expect_success 'push status output scrubs
> >> password' '
> >> grep "^To $HTTPD_URL/smart/test_repo.git" status
> >> '
> >>
> >> +cat >"$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update" <<EOF
> >> +#!/bin/sh
> >> +exit 1
> >> +EOF
> >> +chmod a+x "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update"
> >> +
> >> +cat >exp <<EOF
> >> +error: failed to push some refs to '$HTTPD_URL/smart/test_repo.git'
> >> +EOF
> >
> > I know the t5541 script, which is old and messy, led you into these bad
> > constructs. But usually in modern tests we:
> >
> > 1. Try to keep all commands inside test_expect blocks to catch
> > unexpected failures or unwanted output.
> >
> > 2. Use write_script for writing scripts, like:
> >
> > write_script "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update"
> > <<-\EOF
> > exit 1
> > EOF
> >
> > 3. Backslash our here-doc delimiter to suppress interpolation.
> >
> >> +test_expect_success 'failed push status output scrubs password' '
> >> + cd "$ROOT_PATH"/test_repo_clone &&
> >> + test_must_fail git push "$HTTPD_URL_USER_PASS/smart/test_repo.git"
> >> +HEAD:scrub_err 2>stderr &&
> >> + grep "^error: failed to push some refs" stderr >act &&
> >> + test_i18ncmp exp act
> >> +'
> >> +rm -f "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update"
> >
> > Similarly, this "rm" should probably be a test_when_finished in the
> > block with the write_script (unless you really need to carry it over
> > several test_expect blocks, in which case there should be an explicit
> > test_expect cleaning it up).
> Thanks! You're right. I just followed examples in the file.
> Updated [1], will send with the next patch version.
>
> >
> > Instead of grepping for the exact error, should we instead grep for the
> > password to make sure it is not present on _any_ line?
> >
> > -Peff
> >
> One possible issue I see is that this will make it overlap with the
> 'push status output scrubs password' case above. But if it's not a
> problem, I can replace last two lines with just a 'test_i18ngrep !'
>
> [1]:
> https://github.com/sainaen/git/blob/af17713/t/t5541-http-push-smart.sh#L380-L392
--
Brandon Williams
