Signed-off-by: Elijah Newren <new...@gmail.com>
---
t/t6043-merge-rename-directories.sh | 330 ++++++++++++++++++++++++++++++++++++
1 file changed, 330 insertions(+)
diff --git a/t/t6043-merge-rename-directories.sh
b/t/t6043-merge-rename-directories.sh
index f0213f2bbd..ac9c3e9974 100755
--- a/t/t6043-merge-rename-directories.sh
+++ b/t/t6043-merge-rename-directories.sh
@@ -842,4 +842,334 @@ test_expect_success '4a-check: Directory split, with
original directory still pr
# detection.) But, sadly, see testcase 8b.
###########################################################################
+
+###########################################################################
+# SECTION 5: Files/directories in the way of subset of to-be-renamed paths
+#
+# Implicitly renaming files due to a detected directory rename could run
+# into problems if there are files or directories in the way of the paths
+# we want to rename. Explore such cases in this section.
+###########################################################################
+
+# Testcase 5a, Merge directories, other side adds files to original and target
+# Commit O: z/{b,c}, y/d
+# Commit A: z/{b,c,e_1,f}, y/{d,e_2}
+# Commit B: y/{b,c,d}
+# Expected: z/e_1, y/{b,c,d,e_2,f} + CONFLICT warning
+# NOTE: While directory rename detection is active here causing z/f to
+# become y/f, we did not apply this for z/e_1 because that would
+# give us an add/add conflict for y/e_1 vs y/e_2. This problem with
+# this add/add, is that both versions of y/e are from the same side
+# of history, giving us no way to represent this conflict in the
+# index.
+
+test_expect_success '5a-setup: Merge directories, other side adds files to
original and target' '
+ test_create_repo 5a &&
+ (
+ cd 5a &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ mkdir y &&
+ echo d >y/d &&
+ git add z y &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ echo e1 >z/e &&
+ echo f >z/f &&
+ echo e2 >y/e &&
+ git add z/e z/f y/e &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git checkout B &&
+ git mv z/b y/ &&
+ git mv z/c y/ &&
+ rmdir z &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_failure '5a-check: Merge directories, other side adds files to
original and target' '
+ (
+ cd 5a &&
+
+ git checkout A^0 &&
+
+ test_must_fail git merge -s recursive B^0 >out &&
+ test_i18ngrep "CONFLICT.*implicit dir rename" out &&
+
+ git ls-files -s >out &&
+ test_line_count = 6 out &&
+ git ls-files -u >out &&
+ test_line_count = 0 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ :0:y/b :0:y/c :0:y/d :0:y/e :0:z/e :0:y/f &&
+ git rev-parse >expect \
+ O:z/b O:z/c O:y/d A:y/e A:z/e A:z/f &&
+ test_cmp expect actual
+ )
+'
+
+# Testcase 5b, Rename/delete in order to get add/add/add conflict
+# (Related to testcase 8d; these may appear slightly inconsistent to users;
+# Also related to testcases 7d and 7e)
+# Commit O: z/{b,c,d_1}
+# Commit A: y/{b,c,d_2}
+# Commit B: z/{b,c,d_1,e}, y/d_3
+# Expected: y/{b,c,e}, CONFLICT(add/add: y/d_2 vs. y/d_3)
+# NOTE: If z/d_1 in commit B were to be involved in dir rename detection, as
+# we normaly would since z/ is being renamed to y/, then this would be
+# a rename/delete (z/d_1 -> y/d_1 vs. deleted) AND an add/add/add
+# conflict of y/d_1 vs. y/d_2 vs. y/d_3. Add/add/add is not
+# representable in the index, so the existence of y/d_3 needs to
+# cause us to bail on directory rename detection for that path, falling
+# back to git behavior without the directory rename detection.
+
+test_expect_success '5b-setup: Rename/delete in order to get add/add/add
conflict' '
+ test_create_repo 5b &&
+ (
+ cd 5b &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ echo d1 >z/d &&
+ git add z &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ git rm z/d &&
+ git mv z y &&
+ echo d2 >y/d &&
+ git add y/d &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git checkout B &&
+ mkdir y &&
+ echo d3 >y/d &&
+ echo e >z/e &&
+ git add y/d z/e &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_failure '5b-check: Rename/delete in order to get add/add/add
conflict' '
+ (
+ cd 5b &&
+
+ git checkout A^0 &&
+
+ test_must_fail git merge -s recursive B^0 >out &&
+ test_i18ngrep "CONFLICT (add/add).* y/d" out &&
+
+ git ls-files -s >out &&
+ test_line_count = 5 out &&
+ git ls-files -u >out &&
+ test_line_count = 2 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ :0:y/b :0:y/c :0:y/e :2:y/d :3:y/d &&
+ git rev-parse >expect \
+ O:z/b O:z/c B:z/e A:y/d B:y/d &&
+ test_cmp expect actual &&
+
+ test_must_fail git rev-parse :1:y/d &&
+ test_path_is_file y/d
+ )
+'
+
+# Testcase 5c, Transitive rename would cause rename/rename/rename/add/add/add
+# (Directory rename detection would result in transitive rename vs.
+# rename/rename(1to2) and turn it into a rename/rename(1to3). Further,
+# rename paths conflict with separate adds on the other side)
+# (Related to testcases 3b and 7c)
+# Commit O: z/{b,c}, x/d_1
+# Commit A: y/{b,c,d_2}, w/d_1
+# Commit B: z/{b,c,d_1,e}, w/d_3, y/d_4
+# Expected: A mess, but only a rename/rename(1to2)/add/add mess. Use the
+# presence of y/d_4 in B to avoid doing transitive rename of
+# x/d_1 -> z/d_1 -> y/d_1, so that the only paths we have at
+# y/d are y/d_2 and y/d_4. We still do the move from z/e to y/e,
+# though, because it doesn't have anything in the way.
+
+test_expect_success '5c-setup: Transitive rename would cause
rename/rename/rename/add/add/add' '
+ test_create_repo 5c &&
+ (
+ cd 5c &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ mkdir x &&
+ echo d1 >x/d &&
+ git add z x &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ git mv z y &&
+ echo d2 >y/d &&
+ git add y/d &&
+ git mv x w &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git checkout B &&
+ git mv x/d z/ &&
+ mkdir w &&
+ mkdir y &&
+ echo d3 >w/d &&
+ echo d4 >y/d &&
+ echo e >z/e &&
+ git add w/ y/ z/e &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_failure '5c-check: Transitive rename would cause
rename/rename/rename/add/add/add' '
+ (
+ cd 5c &&
+
+ git checkout A^0 &&
+
+ test_must_fail git merge -s recursive B^0 >out &&
+ test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*z/d" out &&
+ test_i18ngrep "CONFLICT (add/add).* y/d" out &&
+
+ git ls-files -s >out &&
+ test_line_count = 9 out &&
+ git ls-files -u >out &&
+ test_line_count = 6 out &&
+ git ls-files -o >out &&
+ test_line_count = 3 out &&
+
+ git rev-parse >actual \
+ :0:y/b :0:y/c :0:y/e &&
+ git rev-parse >expect \
+ O:z/b O:z/c B:z/e &&
+ test_cmp expect actual &&
+
+ test_must_fail git rev-parse :1:y/d &&
+ git rev-parse >actual \
+ :2:w/d :3:w/d :1:x/d :2:y/d :3:y/d :3:z/d &&
+ git rev-parse >expect \
+ O:x/d B:w/d O:x/d A:y/d B:y/d O:x/d &&
+ test_cmp expect actual &&
+
+ git hash-object >actual \
+ w/d~HEAD w/d~B^0 z/d &&
+ git rev-parse >expect \
+ O:x/d B:w/d O:x/d &&
+ test_cmp expect actual &&
+ test_path_is_missing x/d &&
+ test_path_is_file y/d &&
+ grep -q "<<<<" y/d # conflict markers should be present
+ )
+'
+
+# Testcase 5d, Directory/file/file conflict due to directory rename
+# Commit O: z/{b,c}
+# Commit A: y/{b,c,d_1}
+# Commit B: z/{b,c,d_2,f}, y/d/e
+# Expected: y/{b,c,d/e,f}, z/d_2, CONFLICT(file/directory), y/d_1~HEAD
+# Note: The fact that y/d/ exists in B makes us bail on directory rename
+# detection for z/d_2, but that doesn't prevent us from applying the
+# directory rename detection for z/f -> y/f.
+
+test_expect_success '5d-setup: Directory/file/file conflict due to directory
rename' '
+ test_create_repo 5d &&
+ (
+ cd 5d &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ git mv z y &&
+ echo d1 >y/d &&
+ git add y/d &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git checkout B &&
+ mkdir -p y/d &&
+ echo e >y/d/e &&
+ echo d2 >z/d &&
+ echo f >z/f &&
+ git add y/d/e z/d z/f &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_failure '5d-check: Directory/file/file conflict due to directory
rename' '
+ (
+ cd 5d &&
+
+ git checkout A^0 &&
+
+ test_must_fail git merge -s recursive B^0 >out &&
+ test_i18ngrep "CONFLICT (file/directory).*y/d" out &&
+
+ git ls-files -s >out &&
+ test_line_count = 6 out &&
+ git ls-files -u >out &&
+ test_line_count = 1 out &&
+ git ls-files -o >out &&
+ test_line_count = 2 out &&
+
+ git rev-parse >actual \
+ :0:y/b :0:y/c :0:z/d :0:y/f :2:y/d :0:y/d/e &&
+ git rev-parse >expect \
+ O:z/b O:z/c B:z/d B:z/f A:y/d B:y/d/e &&
+ test_cmp expect actual &&
+
+ git hash-object y/d~HEAD >actual &&
+ git rev-parse A:y/d >expect &&
+ test_cmp expect actual
+ )
+'
+
+###########################################################################
+# Rules suggested by section 5:
+#
+# If a subset of to-be-renamed files have a file or directory in the way,
+# "turn off" the directory rename for those specific sub-paths, falling
+# back to old handling. But, sadly, see testcases 8a and 8b.
+###########################################################################
+
test_done
--
2.16.1.106.gf69932adfe
