Hi,
Attached is v3 of my series to teach '--column-numbers' to 'git-grep(1)'.
Since last time, I have:
* Removed '-m' in a few places that I forgot to during v2 [1] [2].
* Expanded upon the definition of '--column-number' in 'git grep
--help'. [3]
* Initialized some new fields in grep_opt to 0 that would be avoided
by memset(). [4]
* Block comment to indicate the desired use of 'cno' in grep.c's
'show_line()' [5], [6].
* Annotated the new tests with the permutation that they are testing.
The most notable change since last time is reorganizing the series to
match Eric's suggestion, which I hope makes the reviewing experience a
little easier. I will strive to apply these lessons in future series.
Little has changed on the implementation front since v2, so I think that
the most outstanding further discussion will be centered around --column
vs --column-number. I have posted some thoughts about that in [7].
Thanks as always for your review :-).
Thanks,
Taylor
[1]: https://public-inbox.org/git/[email protected]
[2]: https://public-inbox.org/git/[email protected]
[3]: https://public-inbox.org/git/[email protected]
[4]:
https://public-inbox.org/git/capig+crxksrphpyeehp6_ndrbnw3he7hkspsk1atpse5pn_...@mail.gmail.com
[5]:
https://public-inbox.org/git/CAPig+cQ2+wTTXE0mhnGnp2pZug=po0scvwco_2agxudaosf...@mail.gmail.com
[6]:
https://public-inbox.org/git/capig+cr0unm2ukcaphyafrvmypx4vgsw4wdswb_gnwe4ecy...@mail.gmail.com
[7]: https://public-inbox.org/git/[email protected]
Taylor Blau (7):
Documentation/config.txt: camel-case lineNumber for consistency
grep.c: expose matched column in match_line()
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: display column number of first match
builtin/grep.c: add '--column-number' option to 'git-grep(1)'
grep.c: add configuration variables to show matched option
contrib/git-jump/git-jump: jump to match column in addition to line
Documentation/config.txt | 7 ++++++-
Documentation/git-grep.txt | 8 +++++++-
builtin/grep.c | 1 +
contrib/git-jump/git-jump | 2 +-
grep.c | 39 +++++++++++++++++++++++++++++---------
grep.h | 2 ++
t/t7810-grep.sh | 22 +++++++++++++++++++++
7 files changed, 69 insertions(+), 12 deletions(-)
Inter-diff (since v2):
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 1645fcf2ae..8a2893d1e1 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -1711,7 +1711,7 @@ grep.lineNumber::
If set to true, enable `-n` option by default.
grep.columnNumber::
- If set to true, enable `-m` option by default.
+ If set to true, enable the `--column-number` option by default.
grep.patternType::
Set the default matching behavior. Using a value of 'basic', 'extended',
diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt
index b75a039768..c5c4d712e6 100644
--- a/Documentation/git-grep.txt
+++ b/Documentation/git-grep.txt
@@ -45,7 +45,7 @@ grep.lineNumber::
If set to true, enable `-n` option by default.
grep.columnNumber::
- If set to true, enable `-m` option by default.
+ If set to true, enable the `--column-number` option by default.
grep.patternType::
Set the default matching behavior. Using a value of 'basic', 'extended',
diff --git a/builtin/grep.c b/builtin/grep.c
index 23ce97f998..512f60c591 100644
--- a/builtin/grep.c
+++ b/builtin/grep.c
@@ -829,7 +829,7 @@ int cmd_grep(int argc, const char **argv, const char
*prefix)
GREP_PATTERN_TYPE_PCRE),
OPT_GROUP(""),
OPT_BOOL('n', "line-number", &opt.linenum, N_("show line
numbers")),
- OPT_BOOL(0, "column-number", &opt.columnnum, N_("show column
numbers")),
+ OPT_BOOL(0, "column-number", &opt.columnnum, N_("show column
number of first match")),
OPT_NEGBIT('h', NULL, &opt.pathname, N_("don't show
filenames"), 1),
OPT_BIT('H', NULL, &opt.pathname, N_("show filenames"), 1),
OPT_NEGBIT(0, "full-name", &opt.relative,
diff --git a/contrib/git-jump/git-jump b/contrib/git-jump/git-jump
index 2706963690..8bc57ea0f8 100755
--- a/contrib/git-jump/git-jump
+++ b/contrib/git-jump/git-jump
@@ -52,7 +52,7 @@ mode_merge() {
# editor shows them to us in the status bar.
mode_grep() {
cmd=$(git config jump.grepCmd)
- test -n "$cmd" || cmd="git grep -n -m"
+ test -n "$cmd" || cmd="git grep -n --column-number"
$cmd "$@" |
perl -pe '
s/[ \t]+/ /g;
diff --git a/grep.c b/grep.c
index 23250e60d0..7284dec155 100644
--- a/grep.c
+++ b/grep.c
@@ -46,6 +46,7 @@ void init_grep_defaults(void)
color_set(opt->color_filename, "");
color_set(opt->color_function, "");
color_set(opt->color_lineno, "");
+ color_set(opt->color_columnno, "");
color_set(opt->color_match_context, GIT_COLOR_BOLD_RED);
color_set(opt->color_match_selected, GIT_COLOR_BOLD_RED);
color_set(opt->color_selected, "");
@@ -1404,6 +1405,11 @@ static void show_line(struct grep_opt *opt, char *bol,
char *eol,
output_color(opt, buf, strlen(buf), opt->color_lineno);
output_sep(opt, sign);
}
+ /**
+ * Treat 'cno' as the 1-indexed offset from the start of a non-context
+ * line to its first match. Otherwise, 'cno' is 0 indicating that we are
+ * being called with a context line.
+ */
if (opt->columnnum && cno) {
char buf[32];
xsnprintf(buf, sizeof(buf), "%d", cno);
diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh
index 7349c7fadc..bbce57c8b1 100755
--- a/t/t7810-grep.sh
+++ b/t/t7810-grep.sh
@@ -99,7 +99,7 @@ do
test_cmp expected actual
'
- test_expect_success "grep -w $L" '
+ test_expect_success "grep -w $L (with --column-number)" '
{
echo ${HC}file:5:foo mmap bar
echo ${HC}file:14:foo_mmap bar mmap
@@ -110,7 +110,7 @@ do
test_cmp expected actual
'
- test_expect_success "grep -w $L" '
+ test_expect_success "grep -w $L (with --{line,column}-number)" '
{
echo ${HC}file:1:5:foo mmap bar
echo ${HC}file:3:14:foo_mmap bar mmap
--
2.17.0
