'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error. It looks for '--valgrind' as well, to
set up some Valgrind-specific stuff. These all happen before the
actual option parsing loop, and the conditions looking for these
options look a bit odd, too. They are not completely correct, either,
because in a bogus invocation like './t1234-foo.sh -r --tee' they
recognize '--tee', although it should be handled as the required
argument of the '-r' option. This patch series will add two more
options to look out for early, and, in addition, will have to extract
these options' stuck arguments (i.e. '--opt=arg') as well.
So let's move the option parsing loop and the couple of related
conditions following it earlier in 'test-lib.sh', before the place
where the test script is executed again for '--tee' and its friends.
Signed-off-by: SZEDER Gábor <szeder....@gmail.com>
---
t/test-lib.sh | 228 ++++++++++++++++++++++++++------------------------
1 file changed, 119 insertions(+), 109 deletions(-)
diff --git a/t/test-lib.sh b/t/test-lib.sh
index ed7267962f..fcc04afdff 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -71,13 +71,125 @@ then
exit 1
fi
+# Parse options while taking care to leave $@ intact, so we will still
+# have all the original command line options when executing the test
+# script again for '--tee' and '--verbose-log' below.
+store_arg_to=
+prev_opt=
+for opt
+do
+ if test -n "$store_arg_to"
+ then
+ eval $store_arg_to=\$opt
+ store_arg_to=
+ prev_opt=
+ continue
+ fi
+
+ case "$opt" in
+ -d|--d|--de|--deb|--debu|--debug)
+ debug=t ;;
+
-i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
+ immediate=t ;;
+
-l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
+ GIT_TEST_LONG=t; export GIT_TEST_LONG ;;
+ -r)
+ store_arg_to=run_list
+ ;;
+ --run=*)
+ run_list=${opt#--*=} ;;
+ -h|--h|--he|--hel|--help)
+ help=t ;;
+ -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
+ verbose=t ;;
+ --verbose-only=*)
+ verbose_only=${opt#--*=}
+ ;;
+ -q|--q|--qu|--qui|--quie|--quiet)
+ # Ignore --quiet under a TAP::Harness. Saying how many tests
+ # passed without the ok/not ok details is always an error.
+ test -z "$HARNESS_ACTIVE" && quiet=t ;;
+ --with-dashes)
+ with_dashes=t ;;
+ --no-color)
+ color= ;;
+ --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
+ valgrind=memcheck
+ tee=t
+ ;;
+ --valgrind=*)
+ valgrind=${opt#--*=}
+ tee=t
+ ;;
+ --valgrind-only=*)
+ valgrind_only=${opt#--*=}
+ tee=t
+ ;;
+ --tee)
+ tee=t ;;
+ --root=*)
+ root=${opt#--*=} ;;
+ --chain-lint)
+ GIT_TEST_CHAIN_LINT=1 ;;
+ --no-chain-lint)
+ GIT_TEST_CHAIN_LINT=0 ;;
+ -x)
+ # Some test scripts can't be reliably traced with '-x',
+ # unless the test is run with a Bash version supporting
+ # BASH_XTRACEFD (introduced in Bash v4.1). Check whether
+ # this test is marked as such, and ignore '-x' if it
+ # isn't executed with a suitable Bash version.
+ if test -z "$test_untraceable" || {
+ test -n "$BASH_VERSION" && {
+ test ${BASH_VERSINFO[0]} -gt 4 || {
+ test ${BASH_VERSINFO[0]} -eq 4 &&
+ test ${BASH_VERSINFO[1]} -ge 1
+ }
+ }
+ }
+ then
+ trace=t
+ else
+ echo >&2 "warning: ignoring -x; '$0' is untraceable
without BASH_XTRACEFD"
+ fi
+ ;;
+ -V|--verbose-log)
+ verbose_log=t
+ tee=t
+ ;;
+ *)
+ echo "error: unknown test option '$opt'" >&2; exit 1 ;;
+ esac
+
+ prev_opt=$opt
+done
+if test -n "$store_arg_to"
+then
+ echo "error: $prev_opt requires an argument" >&2
+ exit 1
+fi
+
+if test -n "$valgrind_only"
+then
+ test -z "$valgrind" && valgrind=memcheck
+ test -z "$verbose" && verbose_only="$valgrind_only"
+elif test -n "$valgrind"
+then
+ test -z "$verbose_log" && verbose=t
+fi
+
+if test -n "$trace" && test -z "$verbose_log"
+then
+ verbose=t
+fi
+
# if --tee was passed, write the output not only to the terminal, but
# additionally to the file test-results/$BASENAME.out, too.
-case "$GIT_TEST_TEE_STARTED, $* " in
-done,*)
- # do not redirect again
- ;;
-*' --tee '*|*' --va'*|*' -V '*|*' --verbose-log '*)
+if test "$GIT_TEST_TEE_STARTED" = "done"
+then
+ : # do not redirect again
+elif test -n "$tee"
+then
mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results"
BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)"
@@ -94,8 +206,7 @@ done,*)
echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE"
test "$(cat "$BASE.exit")" = 0
exit
- ;;
-esac
+fi
# For repeatability, reset the environment to known value.
# TERM is sanitized below, after saving color control sequences.
@@ -193,7 +304,7 @@ fi
# Add libc MALLOC and MALLOC_PERTURB test
# only if we are not executing the test with valgrind
-if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
+if test -n "$valgrind" ||
test -n "$TEST_NO_MALLOC_CHECK"
then
setup_malloc_check () {
@@ -264,107 +375,6 @@ test "x$TERM" != "xdumb" && (
) &&
color=t
-store_arg_to=
-prev_opt=
-for opt
-do
- if test -n "$store_arg_to"
- then
- eval $store_arg_to=\$opt
- store_arg_to=
- prev_opt=
- continue
- fi
-
- case "$opt" in
- -d|--d|--de|--deb|--debu|--debug)
- debug=t ;;
-
-i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
- immediate=t ;;
-
-l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
- GIT_TEST_LONG=t; export GIT_TEST_LONG ;;
- -r)
- store_arg_to=run_list
- ;;
- --run=*)
- run_list=${opt#--*=} ;;
- -h|--h|--he|--hel|--help)
- help=t ;;
- -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
- verbose=t ;;
- --verbose-only=*)
- verbose_only=${opt#--*=}
- ;;
- -q|--q|--qu|--qui|--quie|--quiet)
- # Ignore --quiet under a TAP::Harness. Saying how many tests
- # passed without the ok/not ok details is always an error.
- test -z "$HARNESS_ACTIVE" && quiet=t ;;
- --with-dashes)
- with_dashes=t ;;
- --no-color)
- color= ;;
- --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
- valgrind=memcheck ;;
- --valgrind=*)
- valgrind=${opt#--*=} ;;
- --valgrind-only=*)
- valgrind_only=${opt#--*=} ;;
- --tee)
- ;; # was handled already
- --root=*)
- root=${opt#--*=} ;;
- --chain-lint)
- GIT_TEST_CHAIN_LINT=1 ;;
- --no-chain-lint)
- GIT_TEST_CHAIN_LINT=0 ;;
- -x)
- # Some test scripts can't be reliably traced with '-x',
- # unless the test is run with a Bash version supporting
- # BASH_XTRACEFD (introduced in Bash v4.1). Check whether
- # this test is marked as such, and ignore '-x' if it
- # isn't executed with a suitable Bash version.
- if test -z "$test_untraceable" || {
- test -n "$BASH_VERSION" && {
- test ${BASH_VERSINFO[0]} -gt 4 || {
- test ${BASH_VERSINFO[0]} -eq 4 &&
- test ${BASH_VERSINFO[1]} -ge 1
- }
- }
- }
- then
- trace=t
- else
- echo >&2 "warning: ignoring -x; '$0' is untraceable
without BASH_XTRACEFD"
- fi
- ;;
- -V|--verbose-log)
- verbose_log=t ;;
- *)
- echo "error: unknown test option '$opt'" >&2; exit 1 ;;
- esac
-
- prev_opt=$opt
-done
-if test -n "$store_arg_to"
-then
- echo "error: $prev_opt requires an argument" >&2
- exit 1
-fi
-
-if test -n "$valgrind_only"
-then
- test -z "$valgrind" && valgrind=memcheck
- test -z "$verbose" && verbose_only="$valgrind_only"
-elif test -n "$valgrind"
-then
- test -z "$verbose_log" && verbose=t
-fi
-
-if test -n "$trace" && test -z "$verbose_log"
-then
- verbose=t
-fi
-
if test -n "$color"
then
# Save the color control sequences now rather than run tput
--
2.20.1.151.gec613c4b75
